02/11/2015 www.crouzet.com 63 mm 33 and 67 Watts 33 W Part number 82830010 Long service life Usable power: 27 to 50 W For low-speed, high-power drive applications With 2 ball bearings Power supply via 2 output leads Part numbers Type Type Voltage References 82830010 33 W 828300 24 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) 2100 Absorbed power (W) 4,8 Absorbed current (A) 0,2 Nominal characteristics Speed (rpm) 1500 Torque (mNm) 172 Usable power (W) 27 Absorbed power (W) 45 Absorbed current (A) 1,9 Gearbox case temperature rise (C) 50 Efficiency (%) 60 General characteristics Insulation class (conforming to IEC 85) F (155C) Protection (IEC/EN 60529) IP20 Max. output power (W) 33 Start torque (mNm) 600 Starting current (A) 6,2 Resistance () 3,9 Inductance (mH) 6,4 Torque constant (Nm/A) 0,1 Electrical time constant (ms) 1,64 Mechanical time constant (ms) 19 Thermal time constant (mn) 37 2 492 Inertia (g.cm ) Weight (g) 840 Number of of segments 12 Service life (h) 5000 Ball bearings Wires length (mm) 200 Encoder characteristics Current consumption (mA) 0,1515 Output current (mA) < 20 (25C) Supply (V) 4,535DC Ambient temperature (C) -25+85 Accessories Connection Code Pre-assembled female connector, casing 179228-3, tags 179227-1 and leads AWG24250 mm 79209895 Made to order products, available on request Other supply voltages Shaft lengths at front and/or rear Built-in interference suppression Encoders Other fixing flanges on front and rear Short version possible (L = 90 mm) Dimensions (mm) Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com 828300 - 828305 without encoder o Legend N 0.05 4 holes 3.65 at 90 over 48 4 holes M5 over 40 mm depth 7 mm 4 holes M5 over 40 mm depth 7 mm Dimensions (mm) Encoder on types 828300 - 828305 Curves 828300 o Legend N rpm Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected