SWITCHES.CROUZET.COM 1 LIMIT SWITCHES 05/2016 Universal limit switches 8384 standard 8384 with positive break operation General characteristics Conformity to standards IEC / EN 60947-5-1, including Annex K for version with positive break operation Version Single-pole Degree of protection IEC 60529 IP66 Connections Saddle washer and screw M3.5 2 Wire max. cross-section 2 mm Electrical protection Internal earth terminal Cable entry 3 entries for No. 13 sealing gland, 20.4 , 1.411 pitch (supplied with 2 screw plugs) 2 SWITCHES.CROUZET.COM 1 LIMIT SWITCHES 05/2016 Universal limit switches 8384 standard Metal case 3 cables entries Heads have 4 possible positions at 90 All heads protected by nitrile boot and/or ring Main specifications Steel plunger Reinforced lever with Stepped adjustment plastic roller roller lever Housing Action Metal Snap action 83 840 001 83 841 001 83 842 001 General characteristics Sequence 0 2,5 6 mm 03 6 mm 06 11 mm 1-2 1-2 1-2 Snap action 3-4 3-4 3-4 1-2 1-2 1-2 3-4 3-4 3-4 0,7 0,7 1,5 Mechanical characteristics Minimum operating force (N) 10 15 8 Minimum operating torque (N.m) - - - Minimum total travel force (N) 22 25 15 Minimum total travel torque (N.m) - - - 7 7 7 Mechanical life (operations) 10 10 10 Operating temperature (C) -10 +70 -10 +70 -10 +70 Weight (g) 310 310 310 Comments Accessories for 83 843 0 (see Dimensions - Accessories) Galvanized, passivated steel lever Thermoplastic roller Supplied with nut, washer and locating block loose General characteristics Assigned impulse voltage (Uimp) V 4000 Assigned insulation voltage (Ui) V 500 Thermal current (Ith) A 10 Assigned working characteristics (EN 60 947.5.1) A300 = AC15 240 V 3 A / 120 V 6 A Alternating current Q150 = DC13 125 V 0.55 A Direct current Product adaptations -40 C operating temperature (silicone version) Steel roller levers UL approval : consult us