84134750 Crouzet

Panel Mount Datasheet GN Series DC Output SSRs Current rating 10, 15 and 30 Amps Output voltage 3-60, 1-50, 1-100 and 1-200 VDC Transistor and Mosfet Output Available with or without IP20 touch-safe cover LED Input Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10 A 15 A 30 A 3-32 VDC 84134750 3.5-32 VDC 84134850 84134860 84134870 AVAILABLE OPTIONS Output Type Control Thermal Pad 7: Transistor Voltage Blank: Not included Series 8: MOSFET 0:3.5-32 VDC H: Included 8413 4 7 5 U0 H Touch Safe Cover Rated Voltage & 4: Not included (IP00) Load Current 7: Included (IP20) 5: 3-60 VDC, 10 Amps (with output type 7 only) 5: 1-200 VDC, 10 Amps 6: 1-100 VDC, 15 Amps With output type 8 only 7: 1-50 VDC, 30 Amps Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS Description 8413x750 8413x850 8413x860 8413x870 Recommended Operating Voltage Vdc 3-48 1-150 1-72 1-36 Absolute Maximum Rating Vdc 60 200 100 50 Maximum Off-State Leakage Current Rated Voltage mArms 1 0.1 0.1 0.1 Maximum Load Current Adc (2) 10 10 15 30 Minimum Load Current mA 100 0.1 0.1 0.1 Maximum On-State Voltage Drop Rated Current Vdc 1.4 2.1 0.8 0.8 Maximum On-State Resistance RDS-ON Ohms N/A 0.21 0.05 0.03 Maximum Surge Current Adc (10msec) 15 50 50 72 Thermal Resistance Junction to Case (Rjc) C/W 2 1.25 2.1 1.5 Minimum Heat Sink for Rated Current 40C C/W 5 1.5 2 2 Maximum Pulse Width Modulation Frequency Hz (3) 1500 2000 2500 1200 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (1) INPUT SPECIFICATIONS Description 8413x750 8413x8xx Control Voltage Range 3-32 VDC 3.5-32 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Turn-On Voltage 3 VDC 3.5 VDC (4) Must Turn-Off Voltage 1 VDC 1 VDC Minimum Input Current (for on-state) 9 mA 11 mA Maximum Input Current mA 14.5 mA 15 mA Nominal Input Impedance Ohms Current Regulated Maximum Turn-On Time sec 100 75 Maximum Turn-Off Time sec 200 50 (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3700 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (5) -40 to 100 C Ambient Storage Temperature Range -40 to 100 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (6) 7,210,376 hours (823 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (6) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Heat sinking required, see derating curves. (3) 8 VDC Minimum control voltage. Resistive loads only. Consider switching losses at maximum frequency reduce to 75% output current. (4) Increase minimum voltage by 1V for operations from -20 to -40C. (5) Maximum ambient temperature for 8413x750 is 80C, decrease maximun control voltage 1.35V/C above 80C ambient temperature. (6) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). For additional information or specic questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.