84134850 Crouzet

GN DC Series Panel Mount SSRs 3-60, 1-50, 1-100 & 1-200 VDC Current rating 10, 15 and 30 Amps Output voltage 3-60, 1-50, 1-100 and 1-200 VDC Transistor and Mosfet Output Available with or without IP20 touch-safe cover LED Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Screw or Faston Terminals Redesigned housing with anti-rotation barriers DC control Epoxy Free Design IP00 Package, IP20 Package Screw Terminal Screw Terminal Previous version click here Designation Input Output Current Code SSR, Transistor Output 3-32 VDC 3-60 VDC 10 Amp 84 134 750 SSR, Mosfet Output 3.5-32 VDC 1-200 VDC 10 Amp 84 134 850 SSR, Mosfet Output 3.5-32 VDC 1-100 VDC 15 Amp 84 134 860 SSR, Mosfet Output 3.5-32 VDC 1-50 VDC 30 Amp 84 134 870 Output Type Thermal Pad 7: Transistor Control Voltage Blank: Not Included Series H: Included 8: MOSFET 0: 3.5-32 VDC 8413 4 7 5 0 K H Touch Safe Cover Rated Voltage & Termination 4: Not Included (IP00) Load Current Blank: Screws & clamps 7: Included (IP20) 5: 3-60 VDC, 10 Amps* K: Installed standoffs with screws for PC board 5: 1-200 VDC, 10 Amps** Required for valid part number mounting (IP00 only) 6: 1-100 VDC,15 Amps** For options only and not required for valid part number 7: 1-50 VDC, 30 Amps** Not all part number conbinations are available. > Contact Crouzet Technical Support for information on * With output type 7 only the availability of a specific part number. ** With output type 8 only Output Specification (1)... Description 8413x750 8413x850 8413x860 8413x870 Recommended Operating Voltage Vdc 3-48 1-150 1-72 1-36 Absolute Maximun Rating Vdc 60 200 100 50 Maximum Off-State Leakage Current Rated Voltage mArms 0.5 1 0.1 0.1GN DC Series I I 02 I www.crouzet-ssr.com Output Specifications (1) Description 8413x750 8413x850 8413x860 8413x870 Maximum Load Current Adc (2) 10 10 15 30 Minimum Load Current mA 10 0.1 0.1 0.1 Maximum Surge Current Adc (10msec) 15 50 50 72 Maximum On-State Voltage Drop Rated Current Vpk 1.4 2.1 0.8 0.8 Maximum On-State Resistance RDS-ON Ohms N/A 0.21 0.05 0.03 Thermal Resistance Junction to Case (Rjc) C/W 2 1.25 2.1 1.5 Minimum Heat Sink for Rated Current 40C C/W 5 1.5 2 2 Maximun Pulse Wide Modulation Frequency Hz (3) 1500 2000 2500 1200 Input Specifications (1) Description 8413x750 8413x8xx Control Voltage Range 3-32 VDC 3.5-32 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Turn-On Voltage 3 VDC 3.5 VDC (4) Minimum Turn-Off Voltage 1 VDC 1 VDC Minimum Input Current (for on-state) 9 mA 11 mA Maximum Input Current mA 14.5 mA 15 mA Nominal Input Impedance Ohms Current Regulated Current Regulated Maximum Turn-On Time sec 100 75 Maximum Turn-Off Time sec 200 50 General Specifications (1) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (5) -40 +100 C Ambient Storage Temperature Range -40 +100 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lbs/Nm) (6) w/K option 8-10 / 0.9-1.13 Humidity 85% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40C ambient temperature (7) 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (7) 11,545,504 hours (1,317 years) General Notes 1) All parameters at Tc=25C unless otherwise specified. 2) Heat sinking required, see derating curves. 3) 8VDC Minimum control voltage. Resistive loads only. Consider switching losses at maximum frequency reduce to 75% output current. 4) Increase minimum voltage by 1V for operations from -20 to -40C. 5) Maximum ambient temperature for 8413x750 is 80C, decrease maximun control voltage 1.35V/C above 80C ambient temperature. 6) Option is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB thicknesses from 0.031 to 0.093 inches 0.79 to 2.36 mm ). 7) All parameters at 50% power rating and 100% duty cycle (contact Crouzet tech support for detailed report).