84134909 Crouzet

GNA5 Series Panel Mount SSRs 24 to 280 VAC Current rating 10 and 25 Amps Output voltage 24-280 VAC Triac Output (Resistive Loads Only) Available with or without IP20 touch-safe cover LED Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Screw or Faston Terminals Redesigned housing with anti-rotation barriers AC or DC control EMC Compliant to Level 3 IP00 Package, IP00 Package, IP20 Package Screw Terminal Faston Terminal Screw Terminal Epoxy Free Design Previous version click here Designation Input Output Current Code SSR, Triac Output 3-32 VDC 24-280 VAC 10 Amp 84 134 900 SSR, Triac Output 90-280 VAC 24-280 VAC 10 Amp 84 134 901 SSR, Triac Output 3-32 VDC 24-280 VAC 25 Amp 84 134 910 SSR, Triac Output 90-280 VAC 24-280 VAC 25 Amp 84 134 911 Control Voltage 0: 3-32 VDC 1: 90-280 VAC 4: 3-32 VDC 3/16 input 1/4 output Operating Voltage 5: 90-280 VAC 3/16 input terminals 9: 24-280 VAC/ 7: 3-32 VDC 1/4 input Series (IP00 only) Zero Voltage Turn-On 9: 90-280 VAC 1/4 input 8413 4 9 1 0 K H Termination Touch Safe Cover Rated Load Thermal Pad 4: Not Included (IP00) Current Blank: Screws Blank: Not Included 7: Included (IP20) 0: 10 Amps & clamps H: Included Required for valid part number 1: 25 Amps K: Installed standoffs with screws For options only and not required for valid part number for PC board mounting Not all part number conbinations are available. > Contact Crouzet Technical Support for information on (IP00 only. the availability of a specific part number. Control Voltage 0,1) Output Specification (1)... Description 280 VAC Operating Voltage (47-63Hz) Vrms 24-280 Transient Voltage Vdc (2) 600 Minimum Off-State dv/dt Maximum Rated Voltage V/sec 500 Maximum Off-State Leakage Current Rated Voltage mArms 0.1GNA5 Series I I 02 I www.crouzet-ssr.com Output Specifications (1) Description 10A 25A Maximum Load Current Arms (3) 10 25 Minimum Load Current mArms 100 100 Maximum 1 Cycle Surge Current (50/60Hz) Apk 90/100 239/250 1 second surge current (Apk. Ta = 25C) 50/60 Hz 30 75 Maximum On-State Voltage Drop Rated Current Vpk 1.5 1.3 Thermal Resistance Junction to Case (Rjc) C/W 2.2 0.8 Maximum 1/2 Cycle I t for Fusing (50/60Hz) A sec 41/42 285/259 Minimum Heat Sink for Rated Current 40C C/W 3 1.5 Input Specifications (1) Description DC Control AC Control Control Voltage Range 3-32 VDC (4) 90-280 VAC (5) Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 3 VDC 90 VAC Minimum Turn-Off Voltage 1 VDC 10 VAC Minimum Input Current (for on-state) 9.5 mA 5 mA Maximum Input Current mA 14 mA 8.5 mA Nominal Input Impedance Ohms Current Limited Current Limited Maximum Turn-On Time msec 8.33 (6) 20 Maximum Turn-Off Time msec 8.33 30 General Specifications (1) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 4000 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 +80 C Ambient Storage Temperature Range -40 +100 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lbs/Nm) (8) w/K option 8-10 / 0.9-1.13 Humidity 85% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40C ambient temperature (9) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (9) 7,210,376 hours (823 years) General Notes 1) All parameters at 25C unless otherwise specified. 2) Output will self trigger between 450-600Vpk not suitable for capacitive loads. 3) Heat sinking required, see derating curves. 4) Increase minimum voltage by 1V for operations from -20 to -40C 5) For ambient temperatures above 40C the maximum control voltage must not exceed 250Vac. 6) Turn-on time for Instantaneous turn-on versions is 0.1 msec 7) AC models operating range is -20 to 80 C 8) Option is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB thicknesses from 0.031 to 0.093 inches 0.79 to 2.36 mm ). 9) All parameters at 50% power rating and 100% duty cycle (contact Crouzet tech support for detailed report). 10) Load can be wired to either SSR output terminal 1 or 2. 11) For single surge pulse Tc=25C Tj=125C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by 2 (1.414).