22/11/2013 www.crouzet.com MBA 22 panel mounted timers MBA2F Part number 88901348 Solid state output Panel-mounted pushbutton-type timer Function A delay on energisation 10 timing ranges: 0.05 s to 60 min Supply24VDCand110240VDCAC5060Hz Fast adjustment of timing period on PLCs (compatible with IEC1131) IP 65 Part numbers Type Functions Time ranges Output Nominal rating Supply voltage MBA2F A 3s60s solid state 400mA 100240VAC/DC 88 901 348 Specifications Repetition accuracy (with constant parameters) +/-0,2% Display precision 5% Maximum reset time by de-energisation MBA3F during 7 ms timed delay Maximum reset time by de-energisation MBA3F after 5 ms timing Maximum reset time by de-energisation MBA2F after 60 ms timing Maximum reset time by de-energisation MBA2F after 30 ms timing Solid state open collector PNP output Voltage drop at terminals MBA2F:5VAC MBA3F:3VDC Nominal rating MBA2F: 400mA at 200C (derating 5mA/C) MBA3F: 200mA at 20C (derating 1.5mA/C) Leakage current MBA2F:5mAAC MBA3F:0,1mADC 8 Electrical life (number of operations) > 10 Protection against polarity inversions Protection against load short circuits Display of output state by LED: output in operation Display of output state by LED: Power on Dielectric strength (V rms) 1500 V / 50Hz / 1 min Ripple 10% Temperature limits use (C) -20+60 Temperature limits stored (C) -20+80 Varistor protection against overvoltage Drift Temperature +/- 0,05%/C Drift Voltage +/- 0,2%/V Conformity to standards VDE 0435 / ICE 255 / ICE 1131 / ICE 8014 Protection class according to NFC C 20010-IEC 529-DIN IP65 40050 Panel-mounted Protection class according to NFC C 20010 - IEC 529 - DIN IP10 40050 Terminal Housing material Self-extinguishing 2 Terminal capacity Single-wire 1 x 4 mm 2 Terminal capacity Multi-wire with ferrule 1 x 2,5 mm Terminal screws M3 Tightening torque (Nm) 0,5 Nm Weight (g) 27 Dimensions (mm) Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected22/11/2013 www.crouzet.com o Legend N Panel Nut Sealing ring Dimensions (mm) Panel cut-out Curves Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected