CONTROL ACCESSORIES CONTROL ACCESSORIES
3.43
(84mm)
S5 LEVEL PROBE HOLDER
1.83 1.14
1.93
Single probe holder for use with probe rod of various lengths. This .26 (46.5mm) (29mm)
(49mm)
(6.5mm)
probe is particularly suitable for high temperature and/or high pressure
applications. It is capable of operating at temperatures up to 200C
(392F) and pressures up to 700PSI. Order part # S5.
#8 - 32
.51
(13mm)
36 Threaded Rod. Order part number S5/1.
NOTE: Internal Threading: 1/4 x 20
#3/8 - 18 Dry Seal
S8 LEVEL PROBE
The S8 probe will hold one, two or three 4mm probes. The S8
comes with three (3) one meter lengths of 4mm stainless steel rod.
It comes equipped with a black SBS rubber protective top through
which the leads are routed at a 90 angle.
SPECIFICATIONS:
Material - Holder . . . . . . . . . Polyamide
Material - Top Boot . . . . . . . SBS (Styrene Butadiene)
Wire Terminal . . . . . . . . . . . Stainless Steel with M2 x 4
brass screws
Probe Holder . . . . . . . . . . . . Stainless steel
Gasket . . . . . . . . . . . . . . . . . BB701 (Butadiene)
Thread Size . . . . . . . . . . . . . 1/2 NPT
Operating Temp . . . . . . . . . . 176F (80C)
Top Cover
2
Max Pressure . . . . . . . . . . . 2 Kg/CM (28 PSI)
Probe Holder
Screw, CB M2 x 4 Brass
1.70" Electrode Bearer
(43mm)
1.02"
.275" .472" (26mm) Thread
(7mm) (12mm)
.708"
(18mm)
Gasket, 24 x 31mm (thickness: 2mm)
.157"
(4mm)
1 to 3 Inox Rod:4mm
Note: The end of
the rod has to be
threaded(#8-32) to
L1
fit the probe holder.
L2
.076"
L3
(2mm)
Products and specifications subject to change without notice.
Order/Technical Support Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
2/98.312"
.1650"
.980"
1.295"
1.575"
CONTROL ACCESSORIES CONTROL ACCESSORIES
DR DIN-RAIL
The DR-DIN-Rail material is an extruded aluminum
material of the standard configuration, 35mm.
Timers and Controls conveniently snap onto the
track. Order part number DR which is available in
1 meter (39) lengths. Shown with S08, S11 and
K11 sockets.
S08, S11 SCREW TERMINAL
1.42"
1.14"
SOCKETS (36mm)
(29mm)
.200"
BND DIN Rail
2.30"
.315"
.58"
The S08, and S11 are 8 and 11 pin sockets
(8mm)
.320"
fabricated from a rugged, durable polycarbonate.*
.165"
Mounting is with two 6/32 screws .250 or on
++
.30 DIN-Rail, DR. Order part S08 or S11.
2.06"
.82"
.571"
1.46"
(14.5mm)
.079"
(37mm)
(2mm) .984" 2
S08-600: 600 V, 10 A rated 8 pin socket-UL and CSA
S11 1.69" S08
(25mm)
(43mm)
L595 SERIES DIMENSIONS:
CURRENT TRANSFORMER
20 to 400 Amps
ORDERING INFORMATION:
Compatible with IAR.T Series
.75 2.3
Part Number Input Current
SPECIFICATIONS:
L595-020 20 Amps
L595-050 50 Amps
Input Current . . . . . . . . . 20 to 400 Amps AC 50/60 Hz
L595-100 100 Amps
Output Current . . . . . . . . 100 mA AC
L595-200 200 Amps
Connections . . . . . . . . . . #20 AWG 24 long wires
L595-300 300 Amps
.75
Insulation Class . . . . . . . 600 VAC
L595-400 400 Amps
Enclosure . . . . . . . . . . . . Fiberglass reinforced resin
L546 SERIES DIMENSIONS:
CURRENT TRANSFORMER
50 to 500 Amps
ORDERING INFORMATION:
Compatible with F3I and FWIT Series
2.54
1.10
Part Number Input Current
SPECIFICATIONS: L546-050 50 Amps
L546-100 100 Amps
Input Current . . . . . . . . . 50 to 500 Amps AC 50/60 Hz
L546-200 200 Amps
Output Current . . . . . . . . 5 Amps AC
L546-500 500 Amps
Connections . . . . . . . . . . #16 AWG 24 long wires
1.10
Insulation Class . . . . . . . 600 VAC
Enclosure . . . . . . . . . . . . Molded thermoplastic
Products and specifications subject to change without notice.
Order/Technical Support Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
2/99
2.01"
2.99"
(76 mm)
.165"
(4.19mm)
.2.2"
(56mm)