DIN Rail Mount
Datasheet
GNR 45mm Series
Current ratings of 35 and 45 amps
Output voltage rating: 48-600 VAC
Direct Bond Copper (DBC) Substrate
LED input status indicator
UL 508 Endurance Rating for Enhanced Reliability
UL/CSA Approved, CE Compliant
Built-in overvoltage protection
DIN Rail or Panel Mount
Zero voltage or Instantaneous turn-on output
PRODUCT SELECTION
Control Voltage 35A 45A
4-32 VDC GNR35DHZ GNR45DHZ
90-140 VAC GNR35BHZ GNR45BHZ
180-280 VAC GNR35AHZ GNR45AHZ
AVAILABLE OPTIONS
Operating Voltage Switching Type
A: 180-260 VAC R: Instantaneous Turn-on
B: 90-140 VAC
(for DC control only)
Series D: 4-32 VDC Z: Zero voltage Turn-on
GNR 35 A H Z
Terminal Layout
Rated Load Current
C: Contactor configuration
35: 35 Amps
H: Relay configuration
45: 45 Amps
Required for valid part number
For options only and not required for valid part number
(1)
OUTPUT SPECIFICATIONS
Description GNR35 GNR45
Operating Voltage (47-440Hz) [Vrms] 48-600 48-600
Transient Overvoltage [Vpk, t=1 min.] 1100 1100
Maximum Load Current [Arms]
35 45
Minimum Load Current [Arms] 0.1 0.1
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
0.25 0.25
Static Off-State dv/dt ( V/sec, Ta=25C) (2) 500 500
1 Second Surge Current (Apk Ta=25C) 50/60 Hz 130 150
Forward Voltage Drop (Vpk @ max, Ta=25C) 1.35 1.35
Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] 668/700 716/750
Maximum I t for Fusing (50/60Hz, 1/2 cycle ) [A sec] 2230/2020 2562/2334
HP Ratings at 120V / FLC [Arms] 1.5/20 1.5/20
HP Ratings at 240V / FLC [Arms] 3/17 3/17
HP Ratings at 480V / FLC [Arms] 5/14 5/14
Min/Max stranded wire 16/8 AWG 16/8 AWG
Min/Max solid wire 16/10 AWG 16/10 AWG
FDE-07-01 REV. A
Do not forget to visit us at: www.crydom.com
Copyright 2018 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount
Datasheet
(1)
INPUT SPECIFICATIONS
Description GNRxxDx GNRxxBx GNRxxAx
Control Voltage Range (3) 4.0-32 VDC 90-140 Vrms 180-280 Vrms
Minimum Turn-On Voltage 4.0 VDC 90 Vrms 180 Vrms
Must Turn-Off Voltage 1.0 VDC 10 Vrms 10 Vrms
Minimum Input Current (for on-state) 16 mA 5 mArms 6 mA
Maximum Input Current
19 mA 6 mArms 8 mA
Input Resistance
Current Regulated Current Regulated Current Regulated
Maximum Turn-Off Time [msec]
1/2 Cycle 20 20
Maximum Turn-On Time [msec] (4)
1/2 Cycle 30 30
Min/Max stranded/solid wire 24/16 AWG 24/16 AWG 24/16 AWG
(1)
GENERAL SPECIFICATIONS
Description Parameters
Ambient Operating Temperature Range (3)
-20 to 80C
Ambient Storage Temperature Range
-40 to 100 C
4000 Vrms
Dielectric Strength, Input to Output (50/60Hz)
Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms
Maximum Capacitance, Input/Output 8 pF
Housing Material
UL 94V0 (self extinguishing)
Input Status Indicator
Green LED
Weight (typical) 14.1oz (400g)
GENERAL NOTES
(1) All parameters at 25C unless otherwise specied.
(2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
(3) For 180-280 VAC Control. Maximum Ambient operating temperatures is 60C.
(4) Turn-on time for Instantaneous version (R sufx) is 0.1 msec (for DC control only).
For additional information or specic questions, contact Crydom Technical Support.
(1)
MECHANICAL SPECIFICATIONS
Tolerances: 0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
1.77
Contactor Configuration
[45.0]
1.40
0.37
[35.6]
[9.4]
4.75
0.18
[120.7]
[4.5] DIA.
+3/A1
1/L1
3.47
3.47
[88.1]
GNR45DCZ
3.82
[88.1] 3.47
45 AMP
48-680 VAC
[97.0]
[88.1]
AC-51 (IEC 60947-4-3)
04 - 32 VDC IN
0.28
2/T1
-4/A2
[7.1]
0.18
[4.5] DIA.
0.37
1.40
[9.4]
[35.6]
Do not forget to visit us at: www.crydom.com
Copyright 2018 Crydom Inc. Specifications subject to change without notice.