CCSO-014-1090 SAW Clock Oscillator CCSO-014-1090 Model 14 Pin DIP, 12V, True Sinewave Model CCSO-014-1090 is a 1.090 GHz SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -138 dBc/Hz phase noise at 10kHz offset, +12V input voltage, -55C to +105C operating temperature, 14 PIN DIP hermetic sealed package. The oscillator has no sub-harmonic and the second harmonic is -35dBc Max. Rev: M Date: 18-Sep-2015 Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.comCCSO-014-1090 SAW Clock Oscillator CCSO-014-1090 Model 14 Pin DIP, 12V, True Sinewave Frequency: 1.090 GHz Temperature Range: -55C to 105C Optional*: -40C to 85C Storage: -55C to 110C Input Voltage: 12.0V 0.25V Supply Ripple: 150mV p-p Max 0.820 (20.83) Freq. vs Temp.: 250ppm Max 0.750 Input Current: 30mA Typical, 40mA Max (19.05) Output: True SineWave CRYSTEK 0.520 Output Power: +12dBm 2dBm (13.21) CCSO-014-1090 Start-up time: 2ms Typical, 10ms Max 0.450 1090MHz nd (11.43) 2 Harmonic: -40dBc Typical, -35dBc Max Date Code Sub-harmonics: None Load: 50 Jitter: 0.200 (5.08) SONET OC-48(12kHz~80MHz) 0.18ps RMS Typical, 0.20ps RMS Max 0.236 SONET OC-192(50kHz~80MHz) 0.12ps RMS Typical, 0.15ps RMS Max (6.00) Phase Noise Typical: 0.600 1kHz -110 dBc/Hz (15.24) PIN Connection 10kHz -138 dBc/Hz 1 7 1 N/C 100kHz -150 dBc/Hz 0.300 7 GND (7.62) 1MHz -160 dBc/Hz 8 Output -9 14 Vdd G-sensitivity: 0.910 per g 14 8 *Option: CCSO-014X-1090 -40C to +85C Version Parameter Conditions Available Frequencies Mechanical Shock MIL-STD-202, Method 213, Condition A 1030 MHz Mechanical Vibration MIL-STD-202, Method 204, Condition A 1090 MHz Solderability MIL-STD-202, Method 208 Solvent Resistance MIL-STD-202, Method 215 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition C Thermal Shock MIL-STD-202, Method 107, Condition A Moisture Resistance MIL-STD-202, Method 106, 90% to 98% RH 10 Days Terminal Strength MIL-STD-202, Method 211, Condition A Hermetic Seal MIL-STD-202, Method 112, Procedure III, Condition C Humidity MIL-STD-202, Method 103 High Temperature Life (Operating) MIL-STD-202, Method 108, Condition D, 1,000 hrs at +70C Acceleration MIL-STD-202, Method 212, Condition A Parameter Conditions Rev: M 100% Temperature Testing -55/105C Date: 18-Sep-2015 100% Start-Up Testing -55C and +85C Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com