CVS575S-500.000 SineWave SAW Based VCSO 57.5mm SMD 3.3 Volts Model CVS575S-500 is a 500 MHz voltage-controlled SAW (surface acoustic wave) oscillator (VCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -135 dBc/Hz phase noise at 10 kHz offset, 3.3 V input voltage, 0C to +70C operating temperature, and 57.5 mm SMT package. The oscillator has no sub-harmonic and the second harmonic is typically -14 dBc. Applications include PLL frequency translation, test and measurement, avionics, point-to-point radios, and multi-point radios. Rev: M Date: 02-Oct-2017 Page 1 of 3 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com CCVS575S-500.000 SineWave SAW Based VCSO 57.5mm SMD 3.3 Volts Frequency: 500 MHz Operating Temperature Range: 0C to 70C Storage Temperature Range: -45C to 90C Input Voltage: 3.3V 0.15V Control Voltage Range: 0V to 3.3V Settability At Nominal (25C): 0.5V to 2.0V Freq. vs Temperature: +100ppm, -150ppm Typical Input Current: 20mA Typical, 25mA Max Output: SineWave Pullability APR: 50ppm Min Linearity: 20% Max Output Power: +7dBm Min into 50 Load Start-up time: 2ms Typical, 10ms Max 2nd Harmonic: -14dBc Typical, -10dBc Max Sub-harmonics: None Modulation BW: >20 kHz -3dB Phase Jitter: 12 kHz~80 MHz <1ps RMS (1-sigma) Max 0.295 -0.008 +0.035 0.046 (7.50 -0.20 +0.89) (1.16) CVS575S 2 1 0.046 0.058 0.200 0.015 (1.16) (1.47) 500M (5.08 0.38) 4 3 Date Code 0.200 PIN Function Denotes pad 1 (5.08) 1 Volt Control 2 GND PAD FINISH: Immersion Gold (ENIG) 5 micro inches maximum 3 OUT 4 Vdd SUGGESTED PAD LAYOUT 0.050 via to (1.27) ground 0.01F 0.099 (2.50) 4 3 0.154 (3.91) 12 0.071 (1.80) Dimensions inches (mm) 0.200 Rev: M (5.08) All dimensions are Max unless otherwise specified. Date: 02-Oct-2017 Page 2 of 3 Specifications subject to change without notice. 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com C