P7805-Q12-S2-S CUI Inc

Additional Resources: Product Page 3D Model PCB Footprint datdatee 02/19/201502/19/2015 pagepage 1 of 61 of 6 SERIES: P7805-S DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR FEATURES up to 500 mA current output operating temperature range (-40~85C) pin comparable to LM78 linear regulators wider input range suited for negative output applications low ripple and noise efficiency up to 96% input output output output ripple efficiency MODEL 1 voltage voltage current power and noise typ range max max max typ (Vdc) (Vdc) (Vdc) (mA) (W) (mVp-p) (%) 12 4.75~28 1.5 500 0.75 30 77 P7805-Q12-S1R5-S 12 4.75~25 -1.5 -400 0.6 35 66 12 4.75~28 1.8 500 0.90 30 81 P7805-Q12-S1R8-S 12 4.75~25 -1.8 -400 0.72 35 70 12 4.75~28 2.5 500 1.25 30 87 P7805-Q12-S2-S 12 4.75~25 -2.5 -400 1.0 35 73 24 4.75~28 3.3 500 1.65 30 91 P7805-Q24-S3-S 12 4.75~25 -3.3 -400 1.32 35 78 24 6.5~32 5.0 500 2.5 30 94 P7805-Q24-S5-S 12 6.5~27 -5.0 -400 2 35 83 24 8~32 6.5 500 3.25 30 94 P7805-Q24-S6-S 12 6.5~25 -6.5 -300 1.95 35 84 24 11~32 9.0 500 4.5 30 95 P7805-Q24-S9-S 12 7.0~23 -9.0 -200 1.8 35 86 24 15~32 12 500 6.0 30 95 P7805-Q24-S12-S 12 7.0~20 -12 -200 2.4 35 87 24 18~32 15 500 7.5 30 96 P7805-Q24-S15-S 12 7~17 -15 -200 3.0 35 87 Notes: 1. ripple and noise are measured at 20 MHz BW PART NUMBER KEY P7805 - QXX - SXX - S Base Number Input Voltage Output Voltage Packaging Style SIP cui.comAdditional Resources: Product Page 3D Model PCB Footprint CUI Inc SERIES: P7805-S DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR date 02/19/2015 page 2 of 6 INPUT parameter conditions/description min typ max units -1.5, -1.8, -2.5, -3.3 V output 4.75 12 25 Vdc 1.5, 1.8, 2.5, V output 4.75 12 28 Vdc 3.3 V output 4.75 24 28 Vdc -5.0 V output 6.5 12 27 Vdc 5.0 V output 6.5 24 32 Vdc -6.5 V output 6.5 12 25 Vdc operating input voltage 6.5 V output 8 24 32 Vdc -9.0 V output 7 12 23 Vdc 9.0 V output 11 24 32 Vdc -12 V output 7 12 20 Vdc 12 V output 15 24 32 Vdc -15 V output 7 12 17 Vdc 15 V output 18 24 32 Vdc no-load input power input voltage range 0.12 0.256 W reverse polarity input forbidden filter capacitance filter (1 F) OUTPUT parameter conditions/description min typ max units for positive output applications 1,000 F capacitive load for negative output applications 470 F line regulation input voltage range 0.2 0.4 % load regulation from 10% to 100% load 0.4 0.6 % voltage accuracy 100% load, input voltage range 2 3 % switching frequency 100% load, input voltage range 280 330 450 kHz temperature coefficient -40C ~ 85C 0.02 %/C PROTECTIONS parameter conditions/description min typ max units short circuit protection continuous, automatic recovery short circuit input power input voltage range 0.5 1.8 W over temperature protection internal IC junction 150 C SAFETY AND COMPLIANCE parameter conditions/description min typ max units conducted emissions CISPR22/EN55022 class B (external circuit required, see figure 1-b) radiated emissions CISPR22/EN55022 class B (external circuit required, see figure 1-b) ESD IEC/EN 61000-4-2 class B, contact 4kV radiated immunity IEC/EN 61000-4-3 class A, 10V/m EFT/burst IEC/EN 61000-4-4 class B, 2kV (external circuit required, see figure 1-a) surge IEC/EN 61000-4-5 class B, 2kV (external circuit required, see figure 1-a) conducted immunity IEC/EN 61000-4-6 class A, 3 Vr.ms voltage dips & interruptions IEC/EN 61000-4-29 class B, 0%-70% MTBF as per MIL-HDBK-217F 25C 2,000,000 hours RoHS 2011/65/EU cui.com