PDQE10-Q24-D5-DIN CUI Inc

Additional Resources: Product Page 3D Model date 07/27/2021 page 1 of 8 SERIES: PDQE10 DESCRIPTION: DC-DC CONVERTER FEATURES industry standard footprint board, chassis and Din rail versions available industrial operating temp -40~+85C 1500 Vdc isolation voltage industry standard footprint compatible with CUI legacy PDQ10 series high efficiency up to 88% 4:1 input rating single & dual output models available output short circuit, over current & overvoltage protection EN 62368-1 2 input output output output ripple efficiency MODEL 1 voltage voltage current power & noise typ range min max max max typ (Vdc) (Vdc) (Vdc) (mA) (mA) (W) (mVp-p) (%) PDQE10-Q24-S3 24 9~36 3.3 0 2400 7.92 80 79 PDQE10-Q24-S5 24 9~36 5 0 2000 10 80 83 PDQE10-Q24-S9 24 9~36 9 0 1111 10 80 86 PDQE10-Q24-S12 24 9~36 12 0 833 10 80 87 PDQE10-Q24-S15 24 9~36 15 0 667 10 80 87 PDQE10-Q24-S24 24 9~36 24 0 416 10 80 88 3 PDQE10-Q24-D5 24 9~36 5 0 1000 10 80 83 3 PDQE10-Q24-D9 24 9~36 9 0 555 10 80 86 3 PDQE10-Q24-D12 24 9~36 12 0 416 10 80 87 3 PDQE10-Q24-D15 24 9~36 15 0 333 10 80 87 3 PDQE10-Q24-D24 24 9~36 24 0 208 10 80 87 PDQE10-Q48-S3 48 18~75 3.3 0 2400 7.92 80 79 PDQE10-Q48-S5 48 18~75 5 0 2000 10 80 83 PDQE10-Q48-S12 48 18~75 12 0 833 10 80 87 PDQE10-Q48-S15 48 18~75 15 0 667 10 80 87 PDQE10-Q48-S24 48 18~75 24 0 416 10 80 88 PDQE10-Q48-D5 48 18~75 5 0 1000 10 80 83 PDQE10-Q48-D12 48 18~75 12 0 416 10 80 87 PDQE10-Q48-D15 48 18~75 15 0 333 10 80 87 PDQE10-Q48-D24 48 18~75 24 0 208 10 80 87 Notes: 1. From 5~100% load, nominal input, 20 MHz bandwidth oscilloscope, with 10 F tantalum and 1 F ceramic capacitors on the output. From 0~5% load, ripple and noise is <5% Vo. 2. Measured at nominal input voltage, full load. The typical efficiencies for the chassis mount and DIN-rail mount versions are ~2% less than the DIP versions due to the input reverse polarity protection. 3. In addition to all DIP versions, chassis mount and DIN-rail mount versions of these models are UL approved. 4. All specifications are measured at Ta=25C, humidity < 75%, nominal input voltage, and rated output load unless otherwise specified. cui.comAdditional Resources: Product Page 3D Model CUI Inc SERIES: PDQE10 DESCRIPTION: DC-DC CONVERTER date 07/27/2021 page 2 of 8 PART NUMBER KEY PDQE10 - QXX - X XX - X Mounting Style: Base Number Input Voltage Output Voltage D = DIP Output: T = chassis mount S = single DIN = DIN-rail mount D = dual INPUT parameter conditions/description min typ max units 24 Vdc input models 9 24 36 Vdc 5 operating input voltage 48 Vdc input models 18 48 75 Vdc 24 Vdc input models 9 Vdc 5 start-up voltage 48 Vdc input models 18 Vdc for maximum of 1 second surge voltage 24 Vdc input models -0.7 50 Vdc 48 Vdc input models -0.7 100 Vdc 24 Vdc input models 5.5 6.5 Vdc under voltage shutdown 48 Vdc input models 12 15.5 Vdc 3.3 Vdc output models 429 mA 24 Vdc input models all other models 515 mA current 3.3 Vdc output models 215 mA 48 Vdc input models all other models 258 mA turn on (3.5~12 Vdc or open circuit) turn off (<1.2 Vdc) 6 remote on/off (CTRL) input current when switched off 6 10 mA start-up time 2 s filter Pi filter only present on chassis mount and DIN-rail mount input reverse polarity protection models no load power consumption 0.12 W Notes: 5. The minimum input voltage and start-up voltage for the chassis mount and DIN-rail mount versions are 1 Vdc higher than the DIP versions. 6. The voltage of the Ctrl pin is referenced to input GND pin. OUTPUT parameter conditions/description min typ max units 3.3, 5 Vdc output models 2,200 F 5 Vdc output models 1,000 F 9, 9 Vdc output models 680 F 7 maximum capacitive load 12 Vdc output models 470 F 15 Vdc output models 330 F all other models 100 F 8 voltage accuracy 0% to full load 1 3 % from low line to high line, full load line regulation positive outputs 0.2 0.5 % negative outputs 0.5 1 % from 5% to full load 9 load regulation positive outputs 0.5 1 % negative outputs 0.5 1.5 % 10 voltage balance dual output models 5 % Note: 7. Tested at input voltage range and full load. 8. At 0~5% load, the max output voltage accuracy for the 5 & 9 Vdc output models is 5%. 9. At 0~100% load, the max load regulation is 5%. 10. Unbalanced loads should not exceed 5%. If 5% is exceeded, the product performance cannot be guaranteed. cui.com