PEM2-S24-S15-S CUI Inc

Additional Resources: Product Page 3D Model PCB Footprint date 07/13/2021 page 1 of 6 SERIES: PEM2-S DESCRIPTION: DC-DC CONVERTER FEATURES 2 W isolated output smaller package single/dual unregulated output 3,000 Vdc isolation short circuit protection extended temperature range (-40~105C) antistatic protection up to 8kV high efficiency at light load efficiency up to 86% EN 62368-1 input output output output ripple efficiency MODEL 2 voltage voltage current power and noise typ range min max max typ typ (Vdc) (Vdc) (Vdc) (mA) (mA) (W) (mVp-p) (%) 1 PEM2-S5-S5-S 5 4.5~5.5 5 40 400 2 75 82 1 PEM2-S5-S12-S 5 4.5~5.5 12 17 167 2 75 82 1 PEM2-S5-S15-S 5 4.5~5.5 15 13 133 2 75 83 1 PEM2-S5-S24-S 5 4.5~5.5 24 8 83 2 75 84 1 PEM2-S5-D5-S 5 4.5~5.5 5 20 200 2 75 80 1 PEM2-S5-D12-S 5 4.5~5.5 12 8 83 2 75 83 1 PEM2-S5-D15-S 5 4.5~5.5 15 7 67 2 75 82 1 PEM2-S5-D24-S 5 4.5~5.5 24 4 42 2 75 84 1 PEM2-S12-S5-S 12 10.8~13.2 5 40 400 2 75 82 1 PEM2-S12-S12-S 12 10.8~13.2 12 17 167 2 75 84 1 PEM2-S12-S15-S 12 10.8~13.2 15 13 133 2 75 85 1 PEM2-S12-D5-S 12 10.8~13.2 5 20 200 2 75 80 1 PEM2-S12-D12-S 12 10.8~13.2 12 8 83 2 75 84 1 PEM2-S12-D15-S 12 10.8~13.2 15 7 67 2 75 84 PEM2-S15-S5-S 15 13.5~16.5 5 40 400 2 75 80 PEM2-S15-D15-S 15 13.5~16.5 15 7 67 2 75 84 1 PEM2-S24-S5-S 24 21.6~26.4 5 40 400 2 75 80 1 PEM2-S24-S12-S 24 21.6~26.4 12 17 167 2 75 84 1 PEM2-S24-S15-S 24 21.6~26.4 15 13 133 2 75 86 1 PEM2-S24-S24-S 24 21.6~26.4 24 8 83 2 75 86 1 PEM2-S24-D5-S 24 21.6~26.4 5 20 200 2 75 80 1 PEM2-S24-D12-S 24 21.6~26.4 12 8 83 2 75 84 1 PEM2-S24-D15-S 24 21.6~26.4 15 7 67 2 75 84 Notes: 1. UL approved 2. Ripple and noise are measured at 20 MHz BW by parallel cable method with 1 F ceramic and 10 F electrolytic capacitors on the output. cui.comAdditional Resources: Product Page 3D Model PCB Footprint CUI Inc SERIES: PEM2-S DESCRIPTION: DC-DC CONVERTER date 07/13/2021 page 2 of 6 PART NUMBER KEY PEM2 - SXX - XXX -S Output Base Number Packaging Style Output Voltage Input Voltage S = single SIP D = dual INPUT parameter conditions/description min typ max units 5 Vdc input models 4.5 5 5.5 Vdc 12 Vdc input models 10.8 12 13.2 Vdc operating input voltage 15 Vdc input models 13.5 15 16.5 Vdc 24 Vdc input models 21.6 24 26.4 Vdc for maximum of 1 second 5 Vdc input models -0.7 9 Vdc surge voltage 12 Vdc input models -0.7 18 Vdc 15 Vdc input models -0.7 21 Vdc 24 Vdc input models -0.7 30 Vdc filter capacitance filter OUTPUT parameter conditions/description min typ max units line regulation for Vin change of 1% 1.2 % measured from 10% load to full load 5 Vdc output models 12 % load regulation 12 Vdc output models 8 % 15 Vdc output models 7 % 24 Vdc output models 6 % voltage accuracy see tolerance envelope curves voltage balance dual output, balanced loads 0.5 1 % switching frequency 100% load, nominal input voltage 100 kHz temperature coefficient 100% load 0.03 %/C PROTECTIONS parameter conditions/description min typ max units 12, 15, & 24 Vdc input models PEM2-S5-S24-S, PEM2-S5-D24-S 1 s 1 short circuit protection all other models: continuous, automatic recovery Notes: 1. The supply voltage must be discontinued at the end of the short circuit duration SAFETY AND COMPLIANCE parameter conditions/description min typ max units isolation voltage input to output, for 1 minute at 1 mA max. 3,000 Vdc isolation resistance input to output, at 500 Vdc 1,000 M certified to 62368-1: EN 2 safety approvals certified to 60950-1: UL conducted/radiated emissions CISPR32/EN55032 class B (external circuit required, see Figure 1) IEC/EN61000-4-2, class B, contact 8kV for single outputs ESD IEC/EN61000-4-2, class B, contact 6kV for dual outputs MTBF as per MIL-HDBK-217F 25C 3,500,000 hours RoHS 2011/65/EU Notes: 2. See specific models noted on page 1 cui.com