Additional Resources: Product Page 3D Model date 06/02/2021 page 1 of 9 SERIES: PQDE6W-Q110 DESCRIPTION: DC-DC CONVERTER FEATURES up to 6W isolated output industry standard pinout ultra-wide 4:1 input range (40~160) single/dual outputs 2250 Vdc isolation output short circuit, over current and over voltage protection input undervoltage protection wide operating temp: -40C to +85C EN62368 approved meets EN50155 railway standard 2 input output output output ripple efficiency MODEL 1 voltage voltage current power & noise typ range min max max max min/typ (Vdc) (Vdc) (Vdc) (mA) (mA) (W) (mVp-p) (%) PQDE6W-Q110-D5 110 40~160 5 0 600 6 100 78/80 PQDE6W-Q110-D12 110 40~160 12 0 250 6 100 82/84 PQDE6W-Q110-D15 110 40~160 15 0 200 6 100 83/85 PQDE6W-Q110-S5 110 40~160 5 0 1200 6 100 78/80 PQDE6W-Q110-S12 110 40~160 12 0 500 6 100 82/84 PQDE6W-Q110-S15 110 40~160 15 0 400 6 100 83/85 PQDE6W-Q110-S24 110 40~160 24 0 250 6 100 84/86 Notes: 1. From 5~100% load, nominal input, 20 MHz bandwidth oscilloscope, with 10 F tantalum and 1 F ceramic capacitors on the output. From 0~5% load, ripple and noise is <5% Vo 2. Measured at nominal input voltage and rated output load. PART NUMBER KEY PQDE6W - Q110 - XXX - X - XXX Base Number Mounting Style: D = DIP Input Voltage Output Output Voltage Heatsink S = single blank = no heatsink T = CHASSIS DIN = DIN-RAIL D = dual H = with heatsink cui.comAdditional Resources: Product Page 3D Model CUI Inc SERIES: PQDE6W-Q110 DESCRIPTION: DC-DC CONVERTER date 06/02/2021 page 2 of 9 INPUT parameter conditions/description min typ max units operating input voltage 40 170 Vdc start-up voltage 40 Vdc surge voltage for maximum of 1 second -0.7 180 Vdc current full load / no load 68/3 70/8 mA filter Pi filter module on: CTRL open or pulled high (3.5~12 V) CTRL module off: CTRL pulled low to GND (0~1.2 V) OUTPUT parameter conditions/description min typ max units output voltage 5 Vdc dual output 470 F 12 Vdc dual output 100 F 15 Vdc dual output 100 F maximum capacitive load 5 Vdc single output 1000 F 12 Vdc single output 470 F 15 Vdc single output 220 F 24 Vdc single output 100 F voltage accuracy 0%~100% load 1 3 % from low line to high line, full load line regulation +Vo 0.2 0.5 % -Vo 0.5 1 % 5%~100% load load regulation +Vo 0.5 1 % -Vo 0.5 1.5 % switching frequency PWM mode 300 kHz transient recovery time 25% load step change, nominal input voltage 300 500 s 25% load step change, nominal input voltage transient response deviation 5 Vdc, 5 Vdc output 3 8 % other outputs 3 5 % temperature coefficient at full load 0.02 0.03 %/C cui.com