Additional Resources: Product Page 3D Model date 09/28/2020 page 1 of 5 SERIES: VGS-35C DESCRIPTION: INTERNAL AC-DC POWER SUPPLY FEATURES universal input range (85 ~ 264 VAC) UL/EN/IEC 62368 certified designed to meet IEC/EN 61558, IEC/EN 60335, and GB4943 system requirements short-circuit, over-current, over-voltage protections CISPR/EN55032 Class B radiated/conducted emissions output adjustable via trimpot +/- 10% 2 output output output ripple efficiency MODEL 1 voltage current power and noise max max typ typ (Vdc) (A) (W) (mVp-p) (%) VGS-35C-5 5 7.0 35 80 83 VGS-35C-12 12 3.0 36 120 87 VGS-35C-15 15 2.4 36 120 89 VGS-35C-24 24 1.5 36 150 88 Notes: 1. Ripple & noise are measured at 20 MHz BW with 47 F aluminum electrolytic capacitor and 0.1 F ceramic capacitor on the output. 2. Measured at 230 Vac PART NUMBER KEY VGS-35C - XX - X Base Number A - with terminal cover Output Voltage B - with conformal coating cui.comAdditional Resources: Product Page 3D Model CUI Inc SERIES: VGS-35C DESCRIPTION: AC-DC POWER SUPPLY date 09/28/2020 page 2 of 5 INPUT parameter conditions/description min typ max units ac input 85 264 Vac voltage dc input 120 373 Vdc frequency 47 63 Hz at 115 Vac 0.8 A current at 230 Vac 0.6 A at 115 Vac, cold start 30 A inrush current at 230 Vac, cold start 50 A leakage current at 240 Vac 0.75 mA no load power consumption 0.3 W OUTPUT parameter conditions/description min typ max units 5 Vdc output 8,000 F 12 Vdc output 1,500 F capacitive load 15 Vdc output 1,000 F 24 Vdc output 750 F 5 Vdc output, full load 2 % initial set point accuracy other outputs, full load 1 % line regulation 0.5 % 5 Vdc output, 0%~100% load 1 % load regulation other outputs, 0%~100% load 0.5 % adjustability built in trim pot 10 % at 115 Vac 8 ms hold-up time at 230 Vac 30 ms switching frequency 65 kHz temperature coefficient 0.03 %/C PROTECTIONS parameter conditions/description min typ max units 5 Vdc output, clamp 6.3 Vdc 12 Vdc output, clamp 16.2 Vdc over voltage protection 15 Vdc output, clamp 21.75 Vdc 24 Vdc output, clamp 33.6 Vdc over current protection auto-recovery 110 200 % short circuit protection hiccup, continuous, auto-recovery SAFETY & COMPLIANCE parameter conditions/description min typ max units input to ground 2,000 Vac isolation voltage input to output 4,000 Vac output to ground 1,250 Vac certified to: 62368: IEC/EN/UL designed to meet: 60335: IEC/EN safety approvals designed to meet: 61558: IEC/EN designed to meet: 4943: GB safety class Class I EMI/EMC CISPR32/EN55032 Class B, IEC/EN61000-3-2 Class A ESD IEC/EN 61000-4-2 Contact 6KV /Air 8KV, perf. Criteria A radiated immunity IEC/EN 61000-4-3 10V/m, perf. Criteria A EFT/burst IEC/EN 61000-4-4 2KV, perf. Criteria A surge IEC/EN 61000-4-5 line to line 2KV/line to ground 4KV, perf. Criteria A cui.com