Additional Resources: Product Page 3D Model datdatee 11/13/202011/13/2020 pagepage 1 of 71 of 7 SERIES: VHK200W DESCRIPTION: DC-DC CONVERTER FEATURES up to 200 W isolated output rugged metal enclosure with integrated heat sink 4:1 input range (10~36 Vdc, 18~75 Vdc) single output from 12~48 Vdc 1,500 Vdc isolation over current, over temperature, over voltage, and short circuit protections remote on/off efficiency up to 88% input output output output ripple efficiency MODEL 1 voltage voltage current power and noise range max max max typ (Vdc) (Vdc) (A) (W) (mVp-p) (%) VHK200W-Q24-S12 10 ~ 36 12 16.7 200 150 84 VHK200W-Q24-S15 10 ~ 36 15 13.3 200 150 84 VHK200W-Q24-S24 10 ~ 36 24 8.3 200 240 84 VHK200W-Q24-S28 10 ~ 36 28 7.14 200 280 87 VHK200W-Q24-S48 10 ~ 36 48 4.2 200 480 87 VHK200W-Q48-S12 18 ~ 75 12 16.7 200 150 86 VHK200W-Q48-S15 18 ~ 75 15 13.3 200 150 86 VHK200W-Q48-S24 18 ~ 75 24 8.3 200 240 86 VHK200W-Q48-S28 18 ~ 75 28 7.14 200 280 87 VHK200W-Q48-S48 18 ~ 75 48 4.2 200 480 88 Note: 1. Ripple and noise are measured at full load, 20 MHz BW with 10F tantalum capacitor and 1F ceramic capacitor across output. The 48 Vdc output models require a 10uF aluminum capacitor and 1uF ceramic capacitor across the output. 2. An external input capacitor of 470F for 24 Vdc input models and 47F for 48 Vdc input models is recommended to reduce input ripple voltage. PART NUMBER KEY VHK200W - QXX - SXX X Base Number Input Voltage Output Voltage Remote On/Off Controlblan = positive logic N = negative logic cui.comAdditional Resources: Product Page 3D Model CUI Inc SERIES: VHK200W DESCRIPTION: DC-DC CONVERTER date 11/13/2020 page 2 of 7 INPUT parameter conditions/description min typ max units 24 Vdc input models 10 24 36 Vdc operating input voltage 48 Vdc input models 18 48 75 Vdc power up 9.5 Vdc 24 Vdc input power down 8.5 Vdc under voltage shutdown power up 17 Vdc 48 Vdc input power down 16 Vdc models ON (>3.5 Vdc or open circuit) positive logic models OFF (0~1.2 Vdc) 1 CTRL models ON (0~1.2 Vdc) negative logic models OFF (>3.5 Vdc or open circuit) filter pi filter 40A time delay fuse for 24 Vin models, input fuse 20A time delay fuse for 48 Vin models Note: 1. Open collector refer to -Vin OUTPUT parameter conditions/description min typ max units 12, 15, & 24 V output models 2,200 F maximum capacitive load 28 V output models 100 2,200 F 48 V output models 47 2,200 F 2 line regulation measured from low line to high line 0.2 % 2 load regulation measured from zero load to full load 0.2 % voltage accuracy 1.5 % adjustability 10 % switching frequency 250 kHz transient response 25% step load change 500 s temperature coefficient 0.03 %/C Note: 2. A 100 F aluminum capacitor is required on the output for the 28 Vdc output models. A 47 F aluminum capacitor is required on the output for 48 Vdc output models. PROTECTIONS parameter conditions/description min typ max units short circuit protection continuous over current protection at 90% output voltage 110 160 % over voltage protection 115 140 % over temperature protection shutdown 110 C SAFETY AND COMPLIANCE parameter conditions/description min typ max units for 1 minute: input to output input to case isolation voltage 1,500 Vdc output to case isolation resistance 10 M RoHS 2011/65/EU (CE) ENVIRONMENTAL parameter conditions/description min typ max units operating temperature see derating curve -40 85 C storage temperature -55 105 C cui.com