Additional Resources: Product Page date 09/16/2013 page 1 of 5 SERIES: VLED15 DESCRIPTION: LED DRIVER FEATURES constant current high efficiency 90~135 Vac and 176~265 Vac input range available 0.35~1.5 A output current operates with industry standard dimmers compact encapsulated assembly active power factor correction over voltage, over current, over temperature protection max., short circuit protection: auto recovery high temperature operation (up to 90C case) UL approved, ENEC approved, CE Mark long life > 50,000 hours RoHS 1 output voltage output current output wattage ef ciency MODEL min max min max max max (Vdc) (Vdc) (mA) (mA) (W) (%) VLED15-120-350 24 48 0 350 16.8 80 VLED15-120-480 10 13.5 0 480 6.5 80 VLED15-120-600 8 12 0 600 7.2 80 VLED15-120-700 16 24 0 700 16.8 80 VLED15-120-800 8 12 0 800 9.6 80 VLED15-120-900 10 16 0 900 14.4 80 VLED15-120-900L 8 12 0 900 10.8 80 VLED15-120-1000 10 16 0 1,000 16 80 VLED15-120-1200 10 14.1 0 1,200 16.92 80 VLED15-120-1250 8 12 0 1,250 15 80 2 VLED15-120-1400 8 11.5 0 1,400 16.1 80 VLED15-120-1500 5 10 0 1,500 15 80 VLED15-230-350 24 48 0 350 16.8 80 VLED15-230-480 10 13.5 0 480 6.5 80 VLED15-230-600 8 12 0 600 7.2 80 VLED15-230-700 16 24 0 700 16.8 80 VLED15-230-800 8 12 0 800 9.6 80 VLED15-230-900 10 16 0 900 14.4 80 VLED15-230-900L 8 12 0 900 10.8 80 VLED15-230-1000 10 16 0 1,000 16 80 VLED15-230-1200 10 14.1 0 1,200 16.92 80 VLED15-230-1250 8 12 0 1,250 15 80 2 VLED15-230-1400 8 11.5 0 1,400 16.1 80 VLED15-230-1500 5 10 0 1,500 15 80 Note: 1. Total LED forward voltage must be within these ratings under all conditions including dimming 2. 80C maximum case rating 3. Ripple Current: <40% (p-p) of maximum Output Current with no dimming cui.com DISCONTINUEDAdditional Resources: Product Page CUI Inc SERIES: VLED15 DESCRIPTION: LED DRIVER date 09/16/2013 page 2 of 5 PART NUMBER KEY VLED15 - XXX - XXXX Base Number Input Voltage Output Current 120 = 120 Vac (in mA) 230 = 230 Vac INPUT parameter conditions/description min typ max units 90 135 Vac voltage 176 265 Vac frequency 47 63 Hz input current at 115 Vac 0.22 A inrush current at 25C 5A power factor at 120 Vac 90 % OUTPUT parameter conditions/description min typ max units voltage accuracy of set point 5 % load regulation 5 % PROTECTION parameter conditions/description over voltage protection auto restart over current protection auto restart short circuit protection auto restart control output dims without any icker dimming range use with incandescent dimmer 30 147 degrees (conduction angle/output) over temperature protection auto restart SAFETY & COMPLIANCE parameter conditions/description min typ max units isolation meets the UL 60950-1 reinforced, double insulation NEC (Class 2) EN 60598-1 class II safety approvals UL 60950-1, LPS, UL 8750, EN61347-2-13 EN 55015 class B, FCC class 47 CFR part 15 class B, EN 61000-4-(2,3,4,5,6,11), IEC 61000-3-(2,3) EMI/EMC ANSI c62.41-1991 category A1, 2.5 kV Ringwave harmonics meets EN 61000-3-(2,3) leakage current at 120 Vac 0.25 mA RoHS compliant yes ENVIRONMENTAL parameter conditions/description min typ max units operating temperature -30 90 C storage temperature -40 95 C operating humidity non-condensing 5 95 % surface temperature exposed surfaces, under all operating conditions 90 C cui.com DISCONTINUED