SM4001 DC COMPONENTS CO., LTD. THRU RECTIFIER SPECIALISTS R SM4007 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction SM-1(DO-213AB) * Low profile package MECHANICAL DATA .205(5.2) * Case: Molded plastic SOLDERABLE * Epoxy: UL 94V-0 rate flame retardant .190(4.8) ENDS * Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end .024(0.6) CATHODE MARK * Mounting position: Any .016(0.4) * Weight: 0.12 gram .106(2.7) .095(2.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SM4001 SM4002 SM4003 SM4004 SM4005 SM4006 SM4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage 35 70 140 280 420 560 700 Volts VRMS Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts o Maximum Average Forward Rectified Current T =75 C A IO 1.0 Amps Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave IFSM 30 Amps superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC VF 1.1 Volts o Maximum DC Reverse Current at TA = 25 C 5.0 IR Amps o Rated DC Blocking Voltage TA = 125 C 50 o Typical Thermal Resistance (Note 2) RJL 20 C/W Typical Junction Capacitance (Note 1) CJ pF 9.0 o Operating and Storage Temperature Range TJ, TSTG -65 to +150 C NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2 2 2. Thermal resistance (Junction to Lead),.32in (8.0mm ) coppeer pads to each terminal. REV-1,MARCH,2015 1 www.dccomponents.comRATING AND CHARACTERISTIC CURVES (SM4001 THRU SM4007) FIG. 1 - TYPICAL FORWARD CURRENT FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD DERATING CURVE SURGE CURRENT 1.0 50 8.3ms Single Half Sine-Wave 0.8 40 (JEDEC Mathod) 0.6 30 20 0.4 Single Phase Half Wave 60Hz 10 0.2 Resistive or Inductive Load 0 0 1 2 4 6 8 10 20 40 60 80 100 0 25 50 75 100 125 150 175 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE, (oC) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS 20 20 10 10 4 TJ=125oC 2 1.0 1 TJ=75oC .4 TJ=25oC .1 .2 TJ=25oC .1 Pulse Width=300ms 1% Duty Cycle .04 .01 0 20 40 60 80 100 120 140 .02 PERCENT OF RATED PEAK .01 REVERSE VOLTAGE, (%) .6 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5 - TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10 TJ=25oC 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, (V) DC COMPONENTS CO., LTD. R REV-1,MARCH,2015 2 www.dccomponents.com INSTANTANEOUS FORWARD AVERAGE FORWARD CURRENT, (A) CURRENT, (A) JUNCTION CAPACITANCE, (pF) INSTANTANEOUS REVERSE CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A)