TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24V 60W 1 Phase / NEC Class 2 / DRP024V060W1N Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed With Conformal Coating on PCBA (DRP024V060W1NZ) Class I, Div 2 Hazardous Locations (DRP024V060W1NY) IP20 Compliant NEC Class 2 Compliant Meets worldwide safety requirements RoHS Directive 2011/65/EU Compliant Worldwide AC input range without power de-rating Overvoltage / Overcurrent / Over Temperature Protections Safety Standards CB Certified for worldwide use Model Number: DRP024V060W1N Unit Weight: 0.33 kg Dimensions (L x W x D): 120.6 x 32 x 119.3 mm General Description The CliQ II 24V 60W NEC Class 2 certified power supply is the latest offering from one of the worlds largest power supply manufacturers and solution providers - Delta. The product can be used in general industrial applications, especially for dry indoor condition with the advantage of lower wiring costs for a system due to its compliance with NEC Class 2 requirements. The NEC (National Electrical Code) is a North American standard, which is regarded as a law in most North American states. The NEC describes the installation of electric conductors and equipments within or on buildings. The DRP024V060W1NZ features universal AC input and a high efficiency of more than 87%. The product has an expected life time of 10 years and will have no output power de-rating for the entire range of input voltage from 85Vac to 264Vac. This is useful for systems that require full output power at low input voltage. Typical DIN Rail power supply with similar specifications starts to de-rate at input voltage below 90Vac. Model Information CliQ DIN Rail Power Supply Model Number Input Voltage Range Output Voltage Output Current DRP024V060W1N 85-264Vac 24Vdc 2.5A Model Numbering DRP P 024V 060W 1 N DIN Rail Power Supply Output Voltage Output Power Single Phase NEC Class 2 Y Plastic case, with Class I, Div 2 Z Plastic case, without Class I, Div 2 All parameters are specified at 25C ambient unless otherwise noted. 1 www.DeltaPSU.com (September 2013, Rev. 03) TECHNICAL DATASHEET CliQ II DIN Rail Power Supply 24V 60W 1 Phase / NEC Class 2 / DRP024V060W1N Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240Vac Input Voltage Range 85-264Vac Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Input Current < 1.50A 100Vac Efficiency > 86.0% 115Vac, > 87.0% 230Vac Max Inrush Current < 40A 115Vac, < 80A 230Vac Power Factor Conform to EN61000-3-2 Leakage Current < 1mA 240Vac Output Ratings / Characteristics Nominal Output Voltage 24Vdc Output Voltage Tolerance 2% (initial set point tolerance) Output Voltage Adjustment Range 22-28Vdc Output Current 2.5A Output Power 60W Line Regulation < 0.5% typ. ( 85-264Vac input, 100% input) Load Regulation < 1% typ. ( 85-264Vac input, 0-100% input) Residual Ripple / PARD (20MHz) < 50mVpp / <240mVpp 25C Rise Time < 100ms nominal input (100% load, 25C) Start-up Time < 3000ms nominal input (100% load, 25C) Hold-up Time > 20ms 115Vac, > 125ms 230Vac (100% load, 25C) Dynamic Response (Overshoot & Undershoot O/P Voltage) 5% 10-100% load Start-up with Capacitive Loads 8,000F Max Mechanical Case Cover Plastic Dimensions (L x W x D) 120.6 x 32 x 119.3 mm Unit Weight 0.33 kg Indicator Green LED (DC OK) Cooling System Convection Terminal Input M3 x 3 Pins (Rated 300V/30A) Output M3 x 2 Pins (Rated 300V/30A) Wire AWG 22-10 Input AWG 22-10 Output Mounting Rail Standard TS35 DIN Rail in accordance with EN60715 All parameters are specified at 25C ambient unless otherwise noted. 2 www.DeltaPSU.com (September 2013, Rev. 03)