TECHNICAL DATASHEET PMC Panel Mount Power Supply 12 V 60 W 1 Phase, NEC Class 2 / PMC-12V060W1N PMC Highlights & Features Universal AC input voltage without power de-rating Full corrosion resistant Aluminium chassis NEC Class 2 power supply and Limited Power Source (LPS) approvals High MTBF > 700,000 hrs. as per Telcordia SR-332 Wide operating temperature range from -20C to 70C Conformal Coating (Class I, Div 2 Hazardous Locations Ready) Certified according to IEC/EN/UL 62368-1 Safety Standards CB Certified for worldwide use Model Number: PMC-12V060W1N Unit Weight: 0.28 kg (0.62 lb) Dimensions (L x W x H): 128 x 97 x 38 mm (5.04 x 3.82 x 1.50 inch) General Description Deltas PMC series of panel mount power supply offers a nominal output voltage of 12 V, 60 W output power ranging with NEC Class 2 power supply and Limited Power Source (LPS) approvals. The PMC-12V060W1NA comes with a wide temperature range from -20C to +70C and conformal coating on PCBA (Class I, Div 2 Hazardous Locations Ready) to protect against chemical and dust pollutants. The PMC series also offers overvoltage and overload protection. Using a wide input voltage range design, it is compatible worldwide. The input also includes DC operating voltage from 125-375 Vdc. Best of all, this excellent design and quality does not come with a big price tag. Model Information PMC Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMC-12V060W1NA 85-264 Vac (125-375 Vdc) 12 Vdc 5.00 A Model Numbering PMC 12 V 060 W 1 N PMC Series Output Voltage Output Power Single Phase NEC Class 2 Connector Type A Terminal Block J IP20 Connector* L Front Face* *Options A J L All parameters are specified at 25C ambient and AC input unless otherwise indicated. 1 www.DeltaPSU.com (August 2021, Rev. 04) TECHNICAL DATASHEET PMC Panel Mount Power Supply 12 V 60 W 1 Phase, NEC Class 2 / PMC-12V060W1N Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240 Vac Input Voltage Range 85-264 Vac Nominal Input Frequency 50-60 Hz Input Frequency Range 47-63 Hz Nominal DC Input Voltage 125-250 Vdc DC Input Voltage Range* 125-375 Vdc Input Current < 1.35 A 115 Vac, < 0.90 A 230 Vac Efficiency at 100% Load > 86.0% 115 Vac, > 87.0% 230 Vac Max Power Dissipation 0% load < 1.00W 115Vac, < 1.50W 230Vac 100% load < 9.80W 115Vac, < 8.95W 230Vac Max Inrush Current < 50 A 115 Vac, < 100 A 230 Vac Leakage Current < 1 mA 240 Vac *Safety approval according to IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1. Output Ratings / Characteristics** Nominal Output Voltage 12 Vdc Factory Set Point Tolerance 12 Vdc 2% Output Voltage Adjustment Range 12-14 Vdc Output Current 5.00 A (60 W max.) Output Power 60 W Line Regulation < 0.5% ( 85-264 Vac input, 100% load) Load Regulation < 1.0% ( 85-264 Vac input, 0-100% load) PARD*** (20MHz) < 100 mVpp 25C & 50C < 150 mVpp -10C & -20C Rise Time < 60 ms nominal input (100% load) Start-up Time < 2500 ms nominal input (100% load) Hold-up Time > 15 ms 115 Vac, > 80 ms 230 Vac (100% load) Dynamic Response 5% 85-264Vac input, 0-100% load (Overshoot & Undershoot O/P Voltage) (Slew Rate: 0.1A/s, 50% duty cycle 5Hz to 1KHz) Start-up with Capacitive Loads 5,000 F Max **For power de-rating from 50C to 70C, see power de-rating on page 3. ***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1F ceramic capacitor. All parameters are specified at 25C ambient and AC input unless otherwise indicated. 2 www.DeltaPSU.com (August 2021, Rev. 04)