TECHNICAL DATASHEET PMC Panel Mount Power Supply 24 V 600 W 1 Phase / PMC-24V600W1BA PMC Highlights & Features Universal AC input range High PF > 0.99 115 Vac Power Boost of 200% for 5 seconds Meet Surge Immunity IEC 61000-4-5, Level 4 (CM: 4 kV, DM: 2 kV) Built-in fan speed control and fan lock protection Wide operating temperature range -20C to 70C Overvoltage / Overcurrent / Over Temperature / Short Circuit Protections Certified according to IEC/EN/UL 62368-1 Safety Standards CB Certified for worldwide use Model Number: PMC-24V600W1BA Unit Weight: 1.60 kg (3.53 lb) Dimensions (L x W x H): 215 x 120 x 61 mm (8.46 x 4.72 x 2.40 inch) General Description The PMC-24V600W1BA has a power rating of 600 W with 24 V output voltage. The product features Power Boost of 200% (up to 1200 W) for 5 seconds and built-in fan speed control with fan lock protection. The PMC-24V600W1BA accepts the full universal AC input range and have been approved for major safety standards like IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1, EMI according to EN 55011 (Industrial, scientific and medical (ISM) radio-frequency equipment) and EMS according to EN 61000-6-2 (Immunity for industrial environments). Model Information PMC Panel Mount Power Supply Number Input Voltage Range Output Voltage Output Current Model 85-264 Vac (120-370 Vdc) 24 Vdc 25.0 A PMC-24V600W1BA Model Numbering PM C 24 V 600 W 1 B A Panel Mount Product Type Output Voltage Output Power Single Phase With PFC Front Face connector C Enclosed All parameters are specified at 25C ambient and AC input unless otherwise indicated. 1 www.DeltaPSU.com (July 2021, Rev. 04) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24 V 600 W 1 Phase / PMC-24V600W1BA Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240 Vac Input Voltage Range 85-264 Vac (Refer to the Output De-rating VS. Input Voltage graph) Nominal Input Frequency 50-60 Hz Input Frequency Range 47-63 Hz Nominal DC Input Voltage 142-340 Vdc DC Input Voltage Range* 120-370 Vdc (Refer to the Output De-rating VS. Input Voltage graph) Input Current < 6.50 A 115 Vac, < 3.20 A 230 Vac Efficiency at 100% Load > 86.0% 115 Vac, > 89.0% 230 Vac Max Power Dissipation 0% load < 3.0W 115Vac, < 3.5W 230Vac < 97.0W 115Vac, < 74.0W 230Vac 100% load Max Inrush Current < 20 A 115 Vac, < 40 A 230 Vac Power Factor > 0.99 115 Vac, > 0.94 230 Vac Leakage Current < 1.5 mA *Fulfills tested conditions Output Ratings / Characteristics** Nominal Output Voltage 24 Vdc Factory Set Point Tolerance 24Vdc 2% Output Voltage Adjustment Range 21.6-26.4Vdc Output Current 25.0 A (continuously operating at 24 V) 50.0 A (Power Boost for 5 seconds at 24 V, refer to the details in the Functions section) Output Power 600 W (continuously operating) 1200 W (Power Boost for 5 seconds, refer to the details in the Functions section) Line Regulation < 0.4% ( 115-264 Vac input, 100% load) Load Regulation < 0.625% ( 115-264 Vac input, 0-100% load) PARD*** (20MHz) < 180 mVpp 0C to 50C, < 240 mVpp -20C to 0C Rise Time < 50 ms 115 Vac & 230 Vac (100% load) Start-up Time < 800 ms 230 Vac (100% load) Hold-up Time > 20 ms 115 Vac & 230 Vac (100% load) Dynamic Response 5% 115-264 Vac input, 0-100% load (Overshoot & Undershoot O/P Voltage) (Slew Rate: 0.1A/s, 50% duty cycle 5Hz to 1KHz) Start-up with Capacitive Loads 10,000 F Max **For power de-rating from 50C to 70C, see power de-rating on page 3. ***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1F ceramic capacitor & 22F electrolytic capacitor. All parameters are specified at 25C ambient and AC input unless otherwise indicated. 2 www.DeltaPSU.com (July 2021, Rev. 04)