PMF-24V240WCGB Delta

TECHNICAL DATASHEET PMF Panel Mount Power Supply 24 V 240 W 1 Phase / PMF-24V240WC PMF Highlights & Features Universal AC input voltage Built-in Active PFC and fan speed control Full Aluminium casing for light weight and corrosion resistant handling Conforms to harmonic current IEC/EN/BS EN 61000-3-2, Class A and Class D Remote ON/OFF is available as an option Cold start -20C at 100% load (240 W) Low leakage current < 0.6 mA 240 Vac High MTBF > 700,000 hrs. as per Telcordia SR-332 Short Circuit / Overvoltage / Overcurrent / Over Temperature Protections Safety Standards CB Certified for worldwide use Model Number: PMF-24V240WC Unit Weight: 0.66 kg (1.46 lb) Dimensions (L x W x H): 190 x 93 x 50 mm (7.48 x 3.66 x 1.97 inch) General Description The PMF Panel Mount Power Supply series currently offers nominal output voltages of 24 V. These power supply units come with universal AC input from 85 Vac to 264 Vac and wide operating temperature of -10C to +70C. The built-in active PFC provides high power factor and conforms to harmonic current IEC/EN/BS EN 61000-3-2, Class A and Class D. This versatile series has two different connector options (Front Face and Terminal Block) to satisfy different application needs. Remote ON/OFF function is also available for the PMF series. All PMF power supplies conform to major international safety standards including IEC/EN/UL 62368-1 standards and are fully compliant with RoHS Directive for environmental protection. Model Information PMF Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMF-24V240WC 85-264 Vac 24 Vdc 10.0 A Model Numbering CC Code PM F 24V 240W C Panel Mount Product Series Output Voltage Output Power Package Type Connector Type Variable F PFC Series C Enclosed G Front Face B No Remote ON/OFF A Terminal Block* R With Remote ON/OFF* *Options G A All parameters are specified at 25C ambient and AC input unless otherwise indicated. 1 www.DeltaPSU.com (October 2021, Rev. 05) TECHNICAL DATASHEET PMF Panel Mount Power Supply 24 V 240 W 1 Phase / PMF-24V240WC Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240 Vac Input Voltage Range 85-264 Vac Nominal Input Frequency 50-60 Hz Input Frequency Range 47-63 Hz Input Current < 3.60 A 115 Vac, < 1.80 A 230 Vac Efficiency at 100% Load 87.0% typ. 230 Vac Max Inrush Current (Cold Start) < 35 A 115 Vac, < 60 A 230 Vac Power Factor at 100% Load > 0.99 typ. 115 Vac, > 0.95 typ. 230 Vac Leakage Current < 0.6 mA 240 Vac Output Ratings / Characteristics* Nominal Output Voltage 24 Vdc Factory Set Point Tolerance 24 Vdc 1% (initial set point tolerance from factory) Output Voltage Adjustment Range 21.6-26.4 Vdc Output Current 10.0 A (240 W max.) Output Power 240 W Line Regulation 0.5% typ. ( 115 Vac & 230 Vac) Load Regulation 0.5% typ. ( 115 Vac & 230 Vac) PARD** (20 MHz) < 150 mVpp 25C < 300 mVpp -10C Rise Time 50 ms typ. 115 Vac & 230 Vac (100% load) Start-up Time 1200 ms typ. 115 Vac & 230 Vac (100% load) Hold-up Time 20 ms typ. 115 Vac & 230 Vac (100% load) Dynamic Response 5% (2.4 V pk-pk) 115 Vac & 230 Vac (0-100% load) (Overshoot & Undershoot O/P Voltage) Start-up with Capacitive Loads 8,000 F Max Remote ON/OFF Function (Option) CN102 Output ON: 5-12.5 V Output OFF: 0-0.5 V (For more information, please refer to the details in the Functional Manual section on Page 11) *For power de-rating from 50C to 70C, see power de-rating on page 3. **PARD is measured with an AC coupling mode, 5 cm wires, and in parallel with 0.1 F ceramic capacitor & 47 F electrolytic capacitor. All parameters are specified at 25C ambient and AC input unless otherwise indicated. 2 www.DeltaPSU.com (October 2021, Rev. 05)