TECHNICAL DATASHEET
PMH Panel Mount Power Supply
12V 100W 1 Phase / PMH-12V100WCL
PMH
Highlights & Features
Household appliance approvals for pollution degree 3 to
IEC/EN 60335-1, IEC/EN 61558-1 and IEC/EN 61558-2-16
Universal AC input voltage
Withstand line input voltage surge 300Vac up to 7 seconds
Full power from -25C to +50C operation @ 5000m
or 16400 ft. altitude
Full corrosion resistant aluminium casing
No load power consumption < 0.3W @ 115Vac
Low earth leakage current < 0.75mA
Versatile connector options available: IP20, Front Face and
Harness connectors
Safety Standards
CB Certified for worldwide use
Model Number: PMH-12V100WCL
Unit Weight: 0.31 kg (0.68 lb)
Dimensions (L x W x D): 129 x 97 x 30 mm
(5.08 x 3.82 x 1.18 inch)
General Description
The PMH-12V100WCL offers universal input from 85Vac to 264Vac with nominal output voltage of 12V. The highly efficient convection
cooling construction can operate from -30C to 70C. The single output is specifically designed with compact and competitively priced
for household electrical appliances safety approvals to pollution degree 3 as well as including IEC/EN 60335-1, IEC/EN 61558-2-16,
IEC/EN/UL 60950-1. In addition, the product meets the EMC approvals to EN 61000-6-2 / EN 61000-6-3 for industrial and residential
environment without extra EMI filter required and comes with several connector options consisting of Terminal Block, IP20, Front Face
and Harness connectors.
Model Information
PMH Panel Mount Power Supply
Model Number Input Voltage Range Rated Output Voltage Rated Output Current
PMH-12V100WCL 85-264Vac (120-375Vdc) 12Vdc 8.5A
Model Numbering
PM H 12V
100W C L
Panel Mount Product Type Output Voltage Output Power Package Type L Low Profile Connector Type
H Household C Enclosed S Terminal Block
Series U IP20 Connector*
V Front Face*
T Harness*
*Options
S U V T
All parameters are specified at 25C ambient and AC input unless otherwise indicated.
1
www.DeltaPSU.com (December 2018, Rev. 03)
TECHNICAL DATASHEET
PMH Panel Mount Power Supply
12V 100W 1 Phase / PMH-12V100WCL
Specifications
Input Ratings / Characteristics
Nominal Input Voltage 100-240Vac
Input Voltage Range* 85-264Vac
Nominal Input Frequency 50-60Hz
Input Frequency Range 47-63Hz
DC Input Voltage Range** 120-375Vdc
Input Current < 1.90A @ 115Vac, < 1.20A @ 230Vac
Efficiency at 100% Load > 83% @115Vac, > 85% @ 230Vac
Max Power Dissipation No Load < 0.3W @ 115Vac, < 0.5W @ 230Vac
100% Load < 19.0W @ 115Vac, < 17.0W @ 230Vac
Max Inrush Current (Cold Start) < 30A @ 115Vac, < 60A @ 230Vac
Leakage Current < 0.75mA @ 240Vac
*For power de-rating at 85-100Vac, see power de-rating on page 3.
**Fulfills test conditions for DC input. Safety approval for DC input can be obtained upon request.
Output Ratings / Characteristics***
Nominal Output Voltage 12Vdc
Factory Set Point Tolerance 12Vdc 2%
Output Voltage Adjustment Range 12-14Vdc
Output Current 0-8.5A (102W max.)
Output Power 102W
Line Regulation < 1.0% (@ 100-264Vac input, 100% load)
Load Regulation < 2.0% (@ 100-264Vac input, 0-100% load)
PARD**** (20MHz) < 120mVpp
Rise Time
< 100ms @ nominal input (100% load)
Start-up Time < 2500ms @ 115Vac (100% load),
< 1500ms @ 230Vac (100% load)
Hold-up Time > 5ms @ 115Vac, > 50ms @ 230Vac (100% load)
Dynamic Response (Overshoot & Undershoot O/P Voltage) 5% @ 100-264Vac input, 0-50%, 0-100%, 50-100% load
(Slew Rate: 0.1A/S, 50% duty cycle @ 5Hz to 1kHz)
Start-up with Capacitive Loads 3,000F Max
***For power de-rating from < -25C to -30C, and 50C to 70C, see power de-rating on page 3.
****PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1F ceramic capacitor & 47F electrolytic capacitor.
All parameters are specified at 25C ambient and AC input unless otherwise indicated.
2
www.DeltaPSU.com (December 2018, Rev. 03)