PMT-24V200W1AM Delta

TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A PMT Highlights & Features AC input voltage range selectable by switch Full Aluminium casing for light weight and corrosion resistant handling Convection cooling Cold start -20C at 100% load (200W) Low leakage current < 0.25mA @ 240Vac High MTBF > 700,000 hrs. as per Telcordia SR-332 Short Circuit / Overvoltage / Overcurrent / Over Temperature Protections Safety Standards CB Certified for worldwide use Model Number: PMT-24V200W1A Unit Weight: 0.63 kg (1.39 lb) Dimensions (L x W x D): 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) General Description The new PMT series of panel mount power supplies is the latest offering from one of the worlds largest power supply manufacturers and solution providers - Delta. The product offers a wide operating temperature range from -10C to +60C and can withstand shock and vibration requirements (in accordance to IEC 60068-2-27 and IEC 60068-2-6 respectively). In addition to features like overvoltage and overload protections, Deltas PMT series of panel mount power supplies is unlike many other brands in the same price level. The PMT series is designed for cost competitive markets without compromising the quality of the components and product specifications. The series of products has an expected life time of 10 years. This versatile series has two different connector options (Terminal Block and Front Face) and can also be converted into L Frame (PML) type of power supplies to satisfy different application needs. Model Information PMT Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-24V200W1A 90-132Vac, 180-264Vac 24Vdc 8.80A (Selectable by Switch) Model Numbering CC Code** PM 24V 200W 1 A Panel Mount Product Type Output Voltage Output Power Single Phase No PFC Connector Type B With conformal T Enclosed M Terminal Block coating L L Frame* N Front Face* *Options **For Enclosed type with Terminal Block All parameters are specified at 25C ambient and AC input unless otherwise indicated. 1 www.DeltaPSU.com (November 2018, Rev. 03) TECHNICAL DATASHEET PMT Panel Mount Power Supply 24V 200W 1 Phase / PMT-24V200W1A Specifications Input Ratings / Characteristics Nominal Input Voltage 100-120Vac, 200-240Vac (Selectable by Switch) Input Voltage Range 90-132Vac, 180-264Vac (Selectable by Switch) Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Input Current < 4.50A @ 115Vac, < 2.50A @ 230Vac Efficiency at 100% Load > 88.5% @ 230Vac Max Inrush Current < 55A @ 230Vac Leakage Current < 0.25mA @ 240Vac Output Ratings / Characteristics* Nominal Output Voltage 24Vdc Factory Set Point Tolerance 24Vdc 1% Output Voltage Adjustment Range 21.6-26.4Vdc Output Current 8.80A (211.2W max.) Output Power 211.2W Line Regulation 0.5% typ. (@ 100-132Vac & 200-264Vac) Load Regulation 0.5% typ. (@ 100-132Vac & 200-264Vac ) PARD** (20MHz) < 150mVpp Rise Time 30ms typ. @ 115Vac, 20ms typ. @ 230Vac (100% load) Start-up Time 1000ms typ. @ 115Vac & 230Vac (100% load) Hold-up Time 20ms typ. @ 115Vac (100% load) 24ms typ. @ 230Vac (100% load) Dynamic Response (Overshoot & Undershoot O/P Voltage) 5% @ 0-100% load Start-up with Capacitive Loads 8,000F Max *For power de-rating from 50C to 70C, see power de-rating on page 3. **PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1F ceramic capacitor & 47F electrolytic capacitor. Mechanical Case Chassis / Cover Aluminium Dimensions (L x W x D) 215 x 115 x 50 mm (8.46 x 4.53 x 1.97 inch) Unit Weight 0.63 kg (1.39 lb) Indicator Green LED (DC OK) Cooling System Convection Terminal PM-24V200W1AM M3.5 x 9 Pins (Rated 300V/15A) M3.5 x 9 Pins (Rated 300V/20A) PM-24V200W1AN Wire AWG 22-12 Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 25dBA All parameters are specified at 25C ambient and AC input unless otherwise indicated. 2 www.DeltaPSU.com (November 2018, Rev. 03)