TECHNICAL DATASHEET PMT2 Panel Mount Power Supply PMT2 200 W series / PMT- V200W2B PMT2 Highlights & Features Household appliance approvals for pollution degree 3 to IEC/EN 60335-1, IEC/EN 61558-1 and IEC/EN 61558-2-16 AC input voltage range selectable by switch (90-132 Vac, 180-264 Vac) No load power consumption < 0.5 W Low profile design: 30 mm height Over voltage category III Wide operating temp -30C ~70C (Support -40C cold start) Conforms to harmonic current IEC/EN/BS EN 61000-3-2, Class A High MTBF > 700,000 hrs per Telcordia SR-332 Safety Standards CB Certified for worldwide use Model Number: PMT-V200W2B Unit Weight: 0.42 kg (0.926 lb) Dimensions (L x W x H): 159 x 97 x 30 mm (6.26 x 3.82 x 1.18 inch) General Description nd PMT 2 generation (PMT2) power supplies is designed with low profile, offers selectable AC switch input with nominal output voltage. The highly efficient convection cooling construction can operate from -30C to 70C. The single output is specifically designed with compact and competitively priced for household electrical appliances safety approvals to pollution degree 3 as well as including IEC/EN 60335-1, IEC/EN 61558-2-16, IEC 60950-1 & IEC/EN/UL 62368-1 . Model Information PMT2 Panel Mount Power Supply Model Number Input Voltage Range Rated Output Voltage Rated Output Current PMT-12V200W2B 90-132 Vac, 180-264 Vac 12 Vdc 17.0 A (Selectable by Switch) PMT-24V200W2B 24 Vdc 8.8 A PMT-36V200W2B 36 Vdc 5.9 A PMT-48V200W2B 48 Vdc 4.4 A Model Numbering CC code PM T V 200W 2 B Panel Product Type Output Voltage Output Power Single Family Code: B Connector Type Blank Without Mount Phase with connector cover & T Enclosed 12 12 V With No PFC With UL, TUV, CE Low Profile coating 24 24 V R Terminal Block B With single 36 36 V With UL 1 side coating* 48 48 V M Terminal Block *1 : 12V/24V models only All parameters are specified at 25C ambient and nominal AC input unless otherwise indicated. 1 www.DeltaPSU.com (July 2021, Rev. 01) TECHNICAL DATASHEET PMT2 Panel Mount Power Supply PMT2 200 W series / PMT- V200W2B Specifications Model Number PMT-12V200W2B PMT-24V200W2B PMT-36V200W2B PMT-48V200W2B Input Ratings / Characteristics Nominal Input Voltage 100-120 Vac, 200-240 Vac (Selectable by Switch) Input Voltage Range 90-132 Vac, 180-264 Vac (Selectable by Switch) Nominal Input Frequency 50-60 Hz Input Frequency Range 47-63 Hz Input Current 4 A typ. 115 Vac, 2.2 A typ. 230 Vac Efficiency at 100% Load 88.5% typ. 90.0% typ. 90.0% typ. 91.0% typ. 230Vac No Load Power < 0.5 W 230 Vac Consumption Max Inrush Current (Cold 60 A typ. 230 Vac Start) Leakage Current < 0.5 mA 240 Vac / 50 Hz 2 Output Ratings / Characteristics* Nominal Output Voltage 12 Vdc 24 Vdc 36 Vdc 48 Vdc Factory Set Point 12 Vdc 1% 24 Vdc 1% 36 Vdc 1% 48 Vdc 1% Tolerance Output Voltage Adjustment 10.8-13.2 Vdc 21.6-26.4 Vdc 32.4-39.6 Vdc 43.2-52.8 Vdc Range Output Current 0-17.0 A 0-8.8 A 0-5.9 A 0-4.4 A Output Power 204 W Max. 211.2 W Max. 212.4 W Max. 211.2 W Max. Line Regulation 0.5% typ. 100-132 Vac, 180-264 Vac (Selectable by Switch) Load Regulation 1% typ. 100-132 Vac, 0.5% typ. 100-132 Vac, 180-264 Vac (Selectable by Switch) 180-264 Vac (Selectable by Switch) 3 PARD* (20MHz) < 150 mVpp 0C to 70C, < 200 mVpp 0C to 70C, 450 mVpp typ. -30C to 0C 600 mVpp typ. -30C to 0C Rise Time 30 ms typ. 115 Vac & 230 Vac Start-up Time 500 ms typ. 115 Vac & 230 Vac 30 ms typ. 115 Vac & 230 Vac Hold-up Time Dynamic Response (Overshoot & Undershoot 10% 115 & 230 Vac input, 10-100% load (Slew Rate: 2.5 A / S, 50% duty cycle 5 Hz & 10 KHz) O/P Voltage) Start-up with Capacitive 8,000 F Max 8,000 F Max 3,000 F Max 2,000 F Max Loads *2 : For power de-rating from > 50C to 70C, see power de-rating on page 3. *3 : PARD is measured with an AC coupling mode, and in parallel to end terminal with 0.1F ceramic capacitor & 47F electrolytic capacitor. PSU need to burn in > 5 minutes when AMB 0 All parameters are specified at 25C ambient and nominal AC input unless otherwise indicated. 2 www.DeltaPSU.com (July 2021, Rev. 01)