DESCO INDUSTRIES INC TECHNICAL BULLETIN TB-7005 Reztore Antistatic Coating Made in the Application Instructions United States of America Directions Surfaces Apply Reztore Antistatic Coating to the entire surface to be treated using either the pump or trigger spray bottle. Use a lint-free cloth to wipe the surface evenly. For rough or porous surfaces two coats may be needed to obtain proper protection. Figure 1. Reztore Antistatic Coating 1 Quart (1 liter) Spray Bottle 2.5 Gallons (10 liters) Bag-in-Box Figure 2. Apply Reztore Antistatic Coating to the mat Description Reztore Antistatic Coating is a topical antistatic Other Surfaces - Keyboards: solution for use on dissipative and non-ESD surfaces. Dampen a lint-free cloth or a lint-free swab with After Reztore Antistatic Coating has been applied and Reztore Antistatic Coating. Wipe surface to be the surface dries, an antistatic and protective static protected using either the cloth or swab. The swab will dissipative coating is left behind. The static dissipative work best for tight spots like between keyboard keys. coating will allow charges to drain off when grounded. Use the cloth to wipe the remaining surfaces of the The antistatic properties will reduce triboelectric voltage keyboard or surface to be protected. to under 200 volts. Reztore Antistatic Coating will enhance existing electrical properties of ESD surfaces and give non-ESD surfaces electrical properties until the hard coat is worn away. Reztore Antistatic Coating does not leave behind any harmful insulative barriers. General Guidelines Reztore Antistatic Coating can be used on a variety of surfaces, especially surfaces used in a static sensitive environment. Surfaces include but are not limited to: rubber, vinyl and polyethylene table and floor mats, field service kits, laminated table tops, tote boxes, epoxy, painted surfaces, plexiglass, glass, metal, 3-ring binders, computer screens, computer keyboards, shelving, push carts, conveyor belts, etc practices) Figure 3. Clean a keyboard with Reztore Antistatic Coating When dry, Reztore Antistatic Coating will leave a thin protective antistatic, as well as static dissipative coating on the surface. This enhances existing ESD surfaces and will give temporary electrical properties to insulative surfaces. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Website: DescoIndustries.com 2018 DESCO INDUSTRIES INC TB-7005 Page 1 of 2 November 2018 Employee OwnedRoHS, REACH, and Conflict Minerals Statement Specifications See the Desco Industries RoHS, REACH, and Conflict Reztore Antistatic Coating has zero ionic Minerals Statement: contamination, which will neither contaminate nor DescoIndustries.com/ROHS.aspx corrode sensitive components and assemblies. Ion Level Limit of Detection Desco Industries Limited Warranty (mg/L) (mg/L) See the Desco Industries Limited Warranty: Bromide <3 3 DescoIndustries.com/Warranty.aspx Chloride <1 3 Reztore Antistatic Coating is available from these Fluoride <0.5 0.5 Desco Industries brands: Nitrate 0.5 0.5 Nitrite <0.5 0.5 Ortho-phosphate <5 5 for service and support in North America Sulfate <3 3 1 Quart 10415 2.5 Gallons 10418 Meets conditions of clean room class 1 for above listed ion contaminants per FED-STD-209C. Electrical Properties for service and support in United Kingdom and 6 9 Surface Resistance 1 x 10 to < 1 x 10 ohms per Europe ANSI/ESD S4.1 1 Litre 229014 Triboelectric Charge <200 volts 10 Litres 229015 Charge Decay 0.02 sec. FTMS 101C, Method 4046 for service and support in Asia Testing 1 Liter 10415 It is recommended to test the surfaces after applying 10 Liters 10418 to ensure that all insulative areas have been coated. Desco Industries recommends Reztore Surface & Mat Cleaner to thoroughly clean the surface before applying Reztore Antistatic Coating. Reztore Antistatic Coating is specifically designed to leave behind an antistatic 9 as well as static dissipative coating of 10 ohms, to enhance and provide the static safe properties of the surface. Testing for either surface resistance point to point (RTT) or resistance to ground (RTG) will indicate if the surface is coated properly. Field Test For quick and easy verification of surface resistance we recommend the use of a megohmmeter. These are available from many Desco Industries companies. For testing of static fields, we recommend the use of a static field meter. These instruments are also available from many Desco Industries companies. Storage Reztore Antistatic Coating does not have a set life span. The chemicals are not known to degrade over time when stored at the proper temperature conditions as stated in the Safety Data Sheet. We also recommend that the product be stored in its original container and be sealed when not in use. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Website: DescoIndustries.com 2018 DESCO INDUSTRIES INC TB-7005 Page 2 of 2 Employee Owned