Product Data Sheet Product Data Sheet 3M Shoe Grounder Assembly 2051 The Shoe Grounder Assembly 2051 is designed to effectively ground mobile personnel Specifications Typical Value when they are in contact with conductive and dissipative flooring. The conductive, Hook and Loop 3/4 no-slip outer sole provides a reliable static ground. The function of the shoe grounding assembly depends upon contact with the skin through perspiration in the shoe to Sole Interior Non-marking sustain an electrical contact between the conductive ribbon and the body. The Shoe 5 Sole Exterior <10 ohms Grounder Assembly 2051 comes with a 1 megohm resistor. Meets category ESD SP9.2 Type A. 6 Total Grounder* 1.0 x 10 ohms *Meets the requirements of ANSI/ESD S-20.20-2014, EIA 625 *ESD-SP9.2 Part Numbers 2051 Shoe Grounder Assembly, 1 meg resistor How Shoe Grounders Work Shoe grounders virtually eliminate a charge on a person by electrically connecting the person to a grounded surface. A conductive ribbon placed inside the wearers shoe or WARNING: sock makes electrical contact with the skin through perspiration. The assembly contains All 3M Shoe Grounding Straps and a current-limiting resistor which protects the operator from accidental exposure to Assemblies should not be used in electricity. Shoe grounders must be worn on both feet to maintain ground contact while areas where the individual may come walking. in contact with electrical circuitry exceeding 250 volts. 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. 3 Warranty Limited Remedy Limited Liability. Electronics Materials Solutions Division This product will be free from defects in material and manufacture for one year from the Static Control Products time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT 926 JR Industrial Drive LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS Sanford, NC 27332-9733 FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period Toll-Free: 866-722-3736 stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M International: 919-718-0000 Please recycle. Printed in USA. product or refund the purchase price of the 3M product. Except where prohibited by law, Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. 3M will not be liable for any indirect, special, incidental or consequential loss or damage www.3Mstatic.com 78-9102-1616-3 JHA arising from this 3M product, regardless of the legal theory asserted.