Electrical Properties: Both surfaces low-tribocharging at 50% RH 4 6 Conductive grid layer 1 x 10 to < 1 x 10 ohms at 50% RH 9 Adhesive copolymer resistivity 1 x 10 ohms (nominal) acrylic based adhesive 12 Copolymer layer 8 x 10 ohms (nominal) Physical Properties: 1.9 mil (0.0019), (0.049 mm) total thickness No silicone (adhesive, film backing, release material) Max Temperature 60C (140F) Non-corrosive Property Test Method Value Tensile Strength - Longitudinal ASTM D 882 160 N/mm sq. Tensile Strength - Transverse ASTM D 882 270 N/mm sq. Elongation - Longitudinal ASTM D 882 160% Tape is wound on a paper core. Elongation - Transverse ASTM D 882 50% Static Decay Time FTMS 101B, M4046 0.5 sec. Base Film Thickness 30 micron ANSI/ESD S20.20 requires that all nonessential insulators, such as those made of plastics and paper, must be removed from the Peeling Force 12 N workstation. Substituting ESD tape for regular tape (a very high Cohesion Force LCTS-T2-4 12 hrs tribocharging insulator) protects your ESD susceptible products. Adhesion to Steel LCTS-T3-4 0.300 kg/25mm min. Use and Storage: Width - See Metric Note Users shall determine the suitability of the product for its intended use. For best results, tape inventory should be continually replenished. It is Tape 0.5 .75 1 2 Core Length recommended that rolls of tape be stored flat and rotated (flipped over to Conductive Shielding Grid 81250 81251 81252 81253 3 118 ft. the other side) periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68F (20C) and be protected from exposure to direct sunlight. Tape should not be stored in Tape widths are nominal ultraviolet sunlight, moisture, or heat. Tape over one year old should be RoHS 3, REACH, and Conflict Minerals Statement evaluated by the user to determine acceptability for the users application. metric 0.8 mm (1/32 ). None of the RoHS 3 restricted hazardous substances, REACH Desco Industries, Inc. recommends those tracking useful life of product substances of very high concern as of 2020/01/16, or Conflict 1/2 is 12 mm nominal or 0.472 to use shipping/invoice date as Desco Industries, Inc. expressly warrants Minerals are intentionally added in manufacturing this product. 3/4 is 18 mm nominal or 0.709 that for a period of one (1) year from the date of purchase, our Wescorp Ref: European Union Directive (EU) 2015/863 amending Annex 1 is 24 mm nominal or 0.945 Brand ESD Tape will be free of defects in material (parts) and workmanship II of the RoHS Directive 2011/65/EU, and Regulation (EC) No. 1907/2006/CE. (labor). See details of Limited Warranty online at Desco.com/Warranty.aspx 2 is 48 mm nominal or 1.890 If not otherwise noted tolerance +/- 10%. *Wescorp is a Desco Industries brand. Specifications and procedures subject to change without notice. Made in Malaysia Note: Tape rolls may vary slightly in color WESCORP* ESD CONDUCTIVE SHIELDING GRID TAPE, PAPER CORE DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 DATE: DRAWING PHONE: (909) 627-8178 WEB SITE: Desco.com NUMBER: September DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 81250 PHONE: (781) 821-8370 WEB SITE: Desco.com 2020 2020 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Adhesive Tapes category: Click to view products by Desco manufacturer: Other Similar products are found below : 56-YELLOW-34 X72YD 00-021200-13972-7 021200-64630 60 TAPE (1 ) 62-GRAY-12 X36YD 62-GRAY-1 X36YD 69-1 X36YD 764- 1 x36yd-Red 764-1 x36yd-White 9500PC-3/4 967454-1 1181 19MM X 16,5 METERS 130C-1X15FT E39-RS1-CA 1900-48mm 22- 1/2X36YD 88-SUPER-34X44FT 890103N001 2670 96 EVK-TA-TM047NBH01 20-1 X60YDS 2020-18mmx55m H150 363 3900-Blue 3939-24mmx55m 44-TAN-14 X90YD 4504-34x18 471-Trans-1 x36yd-Bulk 5414 34X36 35-Gray-1/2 4008-12 X36YD 4104-34 x18yd 4116 444-1 x36yd 4466 1 4466W-1/2 x36yd 4492B-12 x72yd 4492B-1 x72yd 4496W-12 x36yd 4508-1 x36yd 4516-3/8x36 4726 1/2 X36YD 054007-43154 054007-43152 06149 11-32-2857 5419 1/2 56 TAPE (1/2 )