TM RCM2200 RabbitCore Microprocessor Core Module Models RCM2200, RCM2210, RCM2250, RCM2260 Specifically designed for small applications, the award-winning RCM2200 RabbitCore microprocessor core module provides a complete embedded control solution in an area half the size of a credit card. Based on the powerful Rabbit 2000 microprocessor, the RCM2000 includes features for embedded control such as Flash memory, SRAM, serial ports, I/O, real-time clock, and integrated Ethernet. To permit parallel development and cost-effective implementation of both Ethernet-enabled and non-Ethernet systems, our pin-compatible RCM2300 model is also available. Features Compact size (2.3 x 1.6 x 0.86 ) 10Base-T Ethernet Up to 512K Flash Up to 512K SRAM 26 general-purpose I/O Designing with RabbitCores The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit microprocessors with extensive integrated features and a C-friendly instruction set designed for use with the Dynamic C development system. The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor for the users system. Small in size but packed with powerful features, these core modules give designers a complete package for control and communication. The integrated Ethernet port frees designers from the limitations of serial-port communications and control and also permits instant local or worldwide connectivity using low-cost networking hardware. Embedded systems using the Ethernet RabbitCore module can be controlled and monitored (as well as programmed and debugged when using appropriate accessory hardware) across any network or the Internet. Programming the RCM2200 Programs are developed using ZWorlds industry-proven Dynamic C software development system, which is included in low-cost development kits. An extensive library of drivers and sample programs is provided. Development Kit Jumpstart your evaluation and design efforts with a complete development kit, which includes RCM2200 RabbitCore (with Ethernet, 256K Flash, and 128K SRAM), prototyping board, AC adapter (U.S. only), Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, and Getting Started manual. 1/14/2005 RCM 2200 RabbitCore Specifications Feature RCM2200 RCM2210 RCM2250 RCM2260 TM Microprocessor Rabbit2000 at 22.1 Mhz 10Base-T, RJ-45 10Base-T 10Base-T, RJ-45 10Base-T Ethernet Port 2 LEDs (raw signals only) 2 LEDs (raw signals only) Flash 256K 512K SRAM 128K 512K Backup Battery Connection for user-supplied battery (to support RTC and SRAM) 26 parallel I/O 16 configurable I/O General Purpose I/O 7 fixed inputs 3 fixed outputs Additional Inputs 2 Startup Mode, Reset Additional Outputs Status, Reset External I/O 4 address, 8 data, I/O Read-Write Four 5 V CMOS-compatible* 4 configurable as asynchronous Serial Ports 2 configurable as clocked serial (SPI) Max. burst rate = CLK/32 Serial Rate Max. sustained rate=burst/2 Connectors Two 2 x 13, 2 mm IDC headers Slave Port permits use as master or as intelligent peripheral with Rabbit-based or other master Slave Interface controller Real-Time Clock Yes Timers Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers Watchdog/Supervisor Yes Power 4.75-5.25 V DC, 134 mA Operating Temp. -40C to + 70C Humidity 5-95%, non condensing 2.3 x 1.6 x 0.86 Board Size (59 x 41 x 22 mm) Pricing (qty. 1/100/1000) 55/44/39 49/39/35 79/62/55 73/60/51 Part Number 101-0454 101-0488 101-0494 101-0955 239 Development Kit U.S. 101-0475 Intl 101-0478 Part Number 1/14/2005