COMMUNICATIONS AND CONTROL PROCESSOR RABBITCORE RCM4200 SERIES Device intelligence and Fast Ethernet connectivity for data logging and serial to Ethernet applications The RCM4200 series of core modules are pin-compatible and communications and data-logging applications. The optional easily interchangeable with other RCM4XXX based products. analog helps to diversify your connectivity options. The RCM4200 acts as the microprocessor of an embedded Evaluation of the RCM4200 is easy with the RabbitCore system and is designed to mount directly to a user-supplied RCM4200 development kit, which provides all the necessary motherboard, allowing CMOS-compatible digital devices to hardware and software to quickly get started. interface with the motherboard. The RCM4200 offers robust features including large memory and Fast Ethernet, making it ideal for intensive BENEFITS APPLICATION EXAMPLE Rabbit 4000 running at 59 MHz 10/100Base-T Ethernet, RJ-45 jack 512K Flash / 512K Data SRAM DISASTER BI-DIRECTIONAL 4 MB or 8 MB Serial Flash for data storage WARNING CENTER SATELLITE COMMUNICATION AND CONTROL Up to 35 GPIO, up to 5 serial ports Surface Buoy 8 channels 12-bit A/D converter option Embedded device networking, intelligence, I/O Air Pressure Satellite and Accoustic control and web server capability RABBITCORE Sensor Link Communication RCM4200 Abilty to remotely update firmware Inside Surface Buoy Wind Direction Sensor Ethernet RELATED PRODUCTS Wave Sensor 1-Wire Connections Temperature Sensor RabbitCore RabbitCore RabbitCore Rabbit SBC Dynamic C RCM3209 RCM4000 RCM4300 BL4S200 Series Series Series SeriesSPECIFICATIONS RCM4200 RCM4210 FEATURES MICROPROCESSOR Rabbit 4000 at 59 MHz Rabbit 4000 at 29 MHz EMI REDUCTION Spectrum spreader for reduced EMI (radiated emissions) ETHERNET PORT 10/100Base-T, RJ-45, 3 LEDs DATA SRAM 512K (8-bit) PROGRAM EXECUTION FAST SRAM 512K (8-bit) N/A FLASH MEMORY 512K (8-bit) SERIAL FLASH MEMORY 8 MB 4 MB BACKUP BATTERY Connection for user-supplied backup battery (to support RTC and data SRAM) 25 parallel digital I/O lines: 35 parallel digital I/O lines: GENERAL-PURPOSE I/O Configurable with 4 layers of alternate functions Configurable with 4 layers of alternate functions ADDITIONAL INPUTS 2 startup mode, reset in, CONVERT 2 startup mode, reset in ADDITIONAL OUTPUTS Status, reset out, analog VREF Status, reset out 8 channels single-ended or 4 channels differential Programmable ANALOG INPUTS N/A gain 1, 2, 4, 5, 8, 10, 16, and 20 V/V A/D CONVERTER RESOLUTION 12 bits (11 bits single-ended) N/A A/D CONVERSION TIME 180 s N/A (INCLUDING 120 S RAW) AUXILIARY I/O BUS Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write 4 shared high-speed, CMOS-compatible ports: 5 shared high-speed, CMOS-compatible ports: All 4 configurable as asynchronous (with IrDA), All 5 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI) 4 as clocked serial (SPI), and 1 as SDLC/HDLC 1 asynchronous clocked serial port shared 1 clocked serial port shared with serial flash SERIAL PORTS with programming port 1 asynchronous clocked serial port dedicated 1 clocked serial port shared with serial flash for programming 1 clocked serial port shared with A/D converter SERIAL RATE Maximum asynchronous baud rate = CLK/8 Slave port allows the RCM4200 to be used as an intelligent peripheral device slaved to a master processor SLAVE INTERFACE REAL TIME CLOCK Yes Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs TIMERS and 8 set/reset registers WATCHDOG/SUPERVISOR Yes 3 channels synchronized PWM with 10-bit counter 4 channels synchronized PWM with 10-bit counter PULSE-WIDTH MODULATORS 3 channels variable-phase or syn-chronized PWM 4 channels variable-phase or syn-chronized PWM with 16-bit counter with 16-bit counter 2 input capture channels can be used to time input signals from various port pins INPUT CAPTURE 1 quadrature decoder channel accepts inputs from external 2 quadrature decoder channel accepts inputs from external QUADRATURE DECODER incremental encoder modules incremental encoder modules 3.03.6 VDC, 240 mA (typ.) 3.3V, 3.03.6 VDC, 200 (typ.) mA 3.3V, POWER (PINS UNLOADED) 275 mA 3.6V and 85C (max.) 225 mA 3.6V and 85C (max.) OPERATING TEMPERATURE -40 C to +85 C 5% to 95%, non-condensing HUMIDITY CONNECTORS One 2 25, 1.27 mm pitch IDC signal header, One 2 5, 1.27 mm pitch IDC programming header 1.84 2.42 0.84 (47 mm 61 mm 21 mm) BOARD SIZE PART NUMBERS DESCRIPTION 20-101-1131 RCM4200 20-101-1132 RCM4210 DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380 leading warranty. For detailed information visit www.digi.com/support. DIGI INTERNATIONAL FRANCE DIGI INTERNATIONAL CHINA 1996-2016 Digi International Inc. All rights reserved. +33-1-55-61-98-98 / www.digi.fr +86-21-50492199 / www.digi.com.cn All trademarks are the property of their respective owners. DIGI INTERNATIONAL JAPAN 91001548 C2/816 +81-3-5428-0261 / www.digi-intl.co.jp