MICROPROCESSOR CORE MODULE RABBITCORE RCM3900 SERIES Combines Fast Ethernet, extended temperature and mass storage to bring versatility to embedded design The RabbitCore RCM3900 series of core modules has fast The microSD Card can be hot-swapped to transfer data program execution SRAM and data SRAM, Flash memory quickly using a standardized file system that can be read and the circuitry necessary for reset and management of directly from the RCM3900 module, or removed and read battery backup for its internal real-time clock and data SRAM. using a microSD card reader. Two 34-pin headers bring out the Rabbit 3000s I/O bus lines, parallel ports and serial ports. The RCM3900 modules mass storage can use the Dynamic C software FAT file system software component to store data and use the same directory file structure commonly used on PCs. BENEFITS APPLICATION EXAMPLE Rabbit 3000 microprocessor at 44 MHz Extended operating temperature range: -20 C to +80 C 10/100Base-T Ethernet DATA PC Up to 1 GB microSD hot-swappable storage Ethernet Lower-risk design of embedded systems RAILWAY SIGNALING SYSTEM applications Softw are debugging directly on target hardware Train Signal Control Box RABBITCORE RCM3900 RELATED PRODUCTS Serial Track Pressure Sensor RabbitCore RabbitCore RabbitCore Rabbit MiniCore Dynamic C RCM4300 RCM3209 RCM3000 RCM6700 Series Series Series SeriesSPECIFICATIONS RCM3900 RCM3910 FEATURES MICROPROCESSOR Rabbit 3000 at 44 MHz Spectrum spreader for reduced EMI (radiated emissions) EMI REDUCTION 10/100Base-T, RJ-45, 3 LEDs ETHERNET PORT 512K program (fast SRAM) + 512K data SRAM FLASH MEMORY (PROGRAM) 512K MEMORY (DATA STORAGE) 32 MB (fixed NAND flash) + 128 MB 1 GB microSD Card 128 MB 1 GB microSD Card LINK/ACT (link/activity) FDX/COL (full-duplex/ collisions) LED INDICATORS SPEED (on for 100Base-T Ethernet connection) CE/BSY (NAND flash enabled/user programable. BACKUP BATTERY Connection for user-supplied backup battery (to support RTC and data SRAM) 52 parallel digital I/O lines: 4 configurable I/O GENERAL-PURPOSE I/O 4 fixed inputs 4 fixed outputs ADDITIONAL INPUTS Startup mode (2), rest in Status, rest out ADDITIONAL OUTPUTS Can be configured for 8 lines and 5 address lines (shared with parallel I/O lines) EXTERNAL I/O BUS Five 3.3V, CMOS-compatible ports (shared with I/O): All 5 configurable as asynchronous (with IrDA) SERIAL PORTS 3 configurable as clocked serial (SPI) 2 configurable as SDL/HDLC 1 asynchronous serial port dedicated programming SERIAL RATE Maximum asynchronous baud rate = CLK/8 A slave port allows the RCM3900/RCM3910 to be used as an intelligent peripheral device slaved to a master processor, SLAVE INTERFACE which may either be another Rabbit 3000 or any other type of processor REAL-TIME CLOCK Yes TIMERS Ten 8-bit timers (6 cascadable, 3 reserved for internal peripherals, one 10-bit timer with 2 match registers WATCHDOG/SUPERVISOR Yes 4 PWM registers with 10-bit free-running counter and priority interrupts PULSE-WIDTH MODULATORS 2-channel input capture can be used to time input signals from various port pins INPUT CAPTURE 2-channel quadrature decoder accepts inputs from external incremental encoder modules QUADRATURE DECODER POWER 3.15-3.45 VDC 325 mA 44.2 MHz, 3.3V OPERATING TEMPERATURE -20 C to +85 C HUMIDITY 5% to 95%, non-condensing CONNECTORS Two 2 x 17, 2 mm pitch One microSD Card socket BOARD SIZE 1.850 x 2.725 x 0.86 (47 mm x 69 mm x 22 mm) PART NUMBERS DESCRIPTION 20-101-1196 RCM3900. Replacement for the RCM3365 20-101-1197 RCM3910. Replacement for the RCM3375 DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380 leading warranty. For detailed information visit www.digi.com/support. DIGI INTERNATIONAL FRANCE DIGI INTERNATIONAL CHINA 1996-2015 Digi International Inc. All rights reserved. +33-1-55-61-98-98 / www.digi.fr +86-21-50492199 / www.digi.com.cn All trademarks are the property of their respective owners. DIGI INTERNATIONAL JAPAN 91001578 D1/915 +81-3-5428-0261 / www.digi-intl.co.jp