PC, DVI INTERFACE CONTROLLER FOR TFT PANEL Model: ALR-1400 Part number : 41710003X/4X-3 or up INSTRUCTIONS CONTENTS Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer 2. System design Diagram of a suggested system 3. Assembly notes Important information about system elements 5. Connection & Operation How to use the controller 9. Connectors, pinouts & jumpers Essential connection information 17. Controller dimensions 18. Application notes 20. Troubleshooting 21. Specifications 22. Appendix I Graphic Mode Support Table 23. Appendix II RS-232 control protocols 26. Appendix III Mapping definition 28. Appendix IV Auto Color Gain 29. Warranty, Caution & Limitation of Liability, Trademarks 30. Contact details It is essential that these instructions are read and understood before connecting or powering up this controller. 1 Introduction Designed for LCD monitor and other flat panel display applications, the ALR-1400 controller provides easy to use interface controller for: TFT (active matrix) LCDs with LVDS interface of 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600, 800x600, 800x480, 640x480, 480x234 resolution Computer video signals of SXGA, XGA, SVGA, VGA standard Support LVDS or TTL interface panel HOW TO PROCEED Ensure you have all parts & that they are correct, refer to: Connection diagram (separate document for each panel) Connector reference (in following section) Assembly notes Check controller switch & jumper settings (errors may damage the panel) Prepare the PC Connect the parts Understand the operation and functions (in following section) IMPORTANT USAGE NOTE This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to: Ensure that all necessary and appropriate safety measures are taken. Obtain suitable regulatory approvals as may be required. Check power settings to all component parts before connection. Understand the operation and connectivity requirements of this controller. DISCLAIMER There is no implied or expressed warranty regarding this material. SYSTEM DESIGN A typical LCD based display system utilising this controller is likely to comprise the following: Summary: 1. LCD panel 2. LCD controller card, ALR-1400 3. LVDS cable (for connection with LVDS panel) 4. TTL cable (for connection with TTL panel) 5. Inverter for CCFT backlight (if not built into LCD) 6. Inverter cable 7. Function controls 8. Function controls cable 9. Status LED 10. DVI-D input 11. Analog VGA input 12. Power input (12VDC / 24VDC) 13. RS-232 control port Digital View offers a range of accessories such as listed above, to make up complete display solution. 2