74AHC1G07QSE-7 Diodes Incorporated

74AHC1G07Q SINGLE BUFFER/DRIVER WITH OPEN DRAIN OUTPUT Description Pin Assignments The 74AHC1G07Q is an automotive compliant single buffer gate with ( Top View ) an open drain output. The device is designed for operation with a power supply range of 2.0V to 5.5V. The open-drain output can be connected to other open drain outputs to implement active-low wired-OR or active- NC 1 5 Vcc high wired-AND functions. The gate performs the positive Boolean function: A 2 4 GND 3 Y Y=A SOT25 / SOT353 A pull up resistor is required to achieve a HIGH state. Applications Features Grade 1 Ambient Temperature Operation: -40C to +125C General Purpose Logic Supply Voltage Range from 2.0V to 5.5V Wide Array of Products, such as: 8mA Output Sink at V = 4.5V Automotive Applications within Grade 1 Temperature Range CC CMOS Low-Power Consumption Industrial Computing/Controls/Automation Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for High Reliability Networking/Communications Slower Input Rise and Fall Time Industrial/Agricultural Equipment Inputs not Limited by V CC Balanced Propagation Delays Balanced Drive Capability ESD Protection Tested per AEC-Q100 Exceeds 2000-V Human Body Model (AEC-Q100-002) Exceeds 1000-V Charged Device Model (AEC-Q100-011) Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The 74AHC1G07Q is suitable for automotive applications requiring specific change control this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. 74AHC1G07Q Pin Descriptions Logic Diagram Pin Name Description NC No Connection A Data Input 4 2 Y GND Ground A Y Data Output VCC Supply Voltage Function Table Input Output A Y H Z L L Absolute Maximum Ratings (Notes 4 & 5) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV V Supply Voltage Range -0.5 to 6.5 V CC V Input Voltage Range -0.5 to 6.5 V I V Voltage Applied to Output in High or Low State -0.5 to 6.5 V O IIK Input Clamp Current (VI < 0) -20 mA -20 mA IOK Output Clamp Current (VO < 0) +25 mA IO Continuous Output Current (VO = 0 to VCC) 75 mA ICC Continuous Current Through VCC I Continuous Current Through GND -75 mA GND T Operating Junction Temperature -40 to +150 C J T Storage Temperature -65 to +150 C STG PD Total Power Dissipation (Note 6) 250 mW Notes: 4. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 5. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. 6. This will need to be derated at higher operating temperatures to prevent exceeding maximum T Refer to package thermal characteristics section. J. 2 of 9 74AHC1G07Q August 2020 Diodes Incorporated www.diodes.com Document number: DS41449 Rev. 1 - 2