HEF4050B Hex non-inverting buffers Rev. 8 18 November 2011 Product data sheet 1. General description The HEF4050B provides six non-inverting buffers with high current output capability suitable for driving TTL or high capacitive loads. Since input voltages in excess of the buffers supply voltage are permitted, the buffers may also be used to convert logic levels of up to 15 V to standard TTL levels. Their guaranteed fan-out into common bipolar logic elements is shown in Table 3. It operates over a recommended V power supply range of 3 V to 15 V referenced to V DD SS (usually ground). Unused inputs must be connected to V , V , or another input. DD SS 2. Features and benefits Accepts input voltages in excess of the supply voltage Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from 40 C to +85 C Complies with JEDEC standard JESD 13-B 3. Applications LOCMOS (Local Oxidation CMOS) to DTL/TTL converter HIGH sink current for driving two TTL loads HIGH-to-LOW level logic conversion 4. Ordering information Table 1. Ordering information All types operate from 40 C to +85 C. Type number Package Name Description Version HEF4050BP DIP16 plastic dual in-line package 16 leads (300 mil) SOT38-4 HEF4050BT SO16 plastic small outline package 16 leads body width 3.9 mm SOT109-1HEF4050B NXP Semiconductors Hex non-inverting buffers 5. Functional diagram 1A 1Y 32 2A 2Y 54 3A 3Y 76 4A 4Y 910 5A 5Y 11 12 input 6A 6Y 14 15 1A 1Y V SS 001aae605 001aae607 001aae604 Fig 1. Logic symbol Fig 2. Logic diagram for one gate Fig 3. Input protection circuit 6. Pinning information 6.1 Pinning HEF4050B V 1 16 n.c. DD 2 15 1Y 6Y 1A 3 14 6A 4 13 2Y n.c. 2A 5 12 5Y 3Y 6 11 5A 3A 7 10 4Y V 8 9 4A SS 001aae606 Fig 4. Pin configuration 6.2 Pin description Table 2. Pin description Symbol Pin Description V 1 supply voltage DD 1Y to 6Y 2, 4, 6, 10, 12, 15 output HEF4050B All information provided in this document is subject to legal disclaimers. NXP B.V. 2011. All rights reserved. Product data sheet Rev. 8 18 November 2011 2 of 12