74AUP1G126
SINGLE BUFFER GATE WITH 3-STATE OUTPUT
Description Pin Assignments
The Advanced, Ultra Low Power (AUP) CMOS logic family is
designed for low power and extended battery life in portable
applications.
The 74AUP1G126 is a single, non-inverting, buffer/bus driver,
designed for operation over a power supply range of 0.8V to 3.6V.
The device has a three-state output that enters a high-impedance
state when a LOW-level is applied to the Output Enable (OE) pin. The
device is fully specified for partial power down applications using I .
OFF
The I circuitry disables the output, preventing damaging current
OFF
backflow when the device is powered down.
Features Applications
Advanced Ultra Low Power (AUP) CMOS Suited for Battery and Low Power Needs
Supply Voltage Range from 0.8V to 3.6V Wide array of products such as:
4mA Output Drive at 3.0V Tablets, E-readers
Low Static Power Consumption Cell Phones, Personal Navigation / GPS
I < 0.9A MP3 Players ,Cameras, Video Recorders
CC
Low Dynamic Power Consumption PCs, Ultrabooks, Notebooks, Netbooks,
C = 6.3pF (Typical at 3.6V) Computer Peripherals, Hard Drives, CD/DVD ROMs
PD
Schmitt Trigger Action at all inputs makes the circuit tolerant for TVs, DVDs, DVRs, Set-Top Boxes
slower input rise and fall time. The hysteresis is typically
250mV at V = 3.0V.
CC
I Supports Partial-Power-Down Mode Operation
OFF
ESD Protection Exceeds JESD 22
2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
Leadless Packages named per JESD30E
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. Green Device (Note 3)
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See
74AUP1G126
Ordering Information
74AUP1G 126 XXX -7
Logic Device Function Package Packing
74 : Logic Prefix 126: 3-State Buffer SE : SOT353 -7 : 7 Tape & Reel
AUP : 0.8 to 3.6 V OE active HIGH FS3 : X2-DFN0808-4
Logic Family FW5 : X1-DFN1010-6
1G : One Gate FW4 :X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
Package 7 Tape and Reel
Package Package
Device
Code
(Notes 4 & 5) Size Quantity Part Number Suffix
2.0mm x 2.0mm x 1.1mm
74AUP1G126SE-7 SE SOT353 3,000/Tape & Reel -7
0.65 mm lead pitch
0.8mm x 0.8mm x 0.35mm
74AUP1G126FS3-7 FS3 X2-DFN0808-4 5,000/Tape & Reel -7
0.5 mm pad pitch (diamond)
1.0mm x 1.0mm x 0.5mm
74AUP1G126FW5-7 FW5 X1-DFN1010-6 5,000/Tape & Reel -7
0.35 mm pad pitch
1.0mm x 1.0mm x 0.4mm
74AUP1G126FW4-7 FW4 X2-DFN1010-6 5,000/Tape & Reel -7
0.35 mm pad pitch
X2-DFN1409-6 1.4mm x 0.9mm x 0.4mm
74AUP1G126FX4-7 FX4 5,000/Tape & Reel -7
Chip Scale Alternative 0.5 mm pad pitch
1.4mm x 1.0mm x 0.4mm
74AUP1G126FZ4-7 FZ4 X2-DFN1410-6 5,000/Tape & Reel -7
0.5 mm pad pitch
Notes: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at