74AUP1G126 SINGLE BUFFER GATE WITH 3-STATE OUTPUT Description Pin Assignments The Advanced, Ultra Low Power (AUP) CMOS logic family is designed for low power and extended battery life in portable applications. The 74AUP1G126 is a single, non-inverting, buffer/bus driver, designed for operation over a power supply range of 0.8V to 3.6V. The device has a three-state output that enters a high-impedance state when a LOW-level is applied to the Output Enable (OE) pin. The device is fully specified for partial power down applications using I . OFF The I circuitry disables the output, preventing damaging current OFF backflow when the device is powered down. Features Applications Advanced Ultra Low Power (AUP) CMOS Suited for Battery and Low Power Needs Supply Voltage Range from 0.8V to 3.6V Wide array of products such as: 4mA Output Drive at 3.0V Tablets, E-readers Low Static Power Consumption Cell Phones, Personal Navigation / GPS I < 0.9A MP3 Players ,Cameras, Video Recorders CC Low Dynamic Power Consumption PCs, Ultrabooks, Notebooks, Netbooks, C = 6.3pF (Typical at 3.6V) Computer Peripherals, Hard Drives, CD/DVD ROMs PD Schmitt Trigger Action at all inputs makes the circuit tolerant for TVs, DVDs, DVRs, Set-Top Boxes slower input rise and fall time. The hysteresis is typically 250mV at V = 3.0V. CC I Supports Partial-Power-Down Mode Operation OFF ESD Protection Exceeds JESD 22 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Leadless Packages named per JESD30E Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See 74AUP1G126 Ordering Information 74AUP1G 126 XXX -7 Logic Device Function Package Packing 74 : Logic Prefix 126: 3-State Buffer SE : SOT353 -7 : 7 Tape & Reel AUP : 0.8 to 3.6 V OE active HIGH FS3 : X2-DFN0808-4 Logic Family FW5 : X1-DFN1010-6 1G : One Gate FW4 :X2-DFN1010-6 FX4 : X2- DFN1409-6 FZ4 : X2- DFN1410-6 Package 7 Tape and Reel Package Package Device Code (Notes 4 & 5) Size Quantity Part Number Suffix 2.0mm x 2.0mm x 1.1mm 74AUP1G126SE-7 SE SOT353 3,000/Tape & Reel -7 0.65 mm lead pitch 0.8mm x 0.8mm x 0.35mm 74AUP1G126FS3-7 FS3 X2-DFN0808-4 5,000/Tape & Reel -7 0.5 mm pad pitch (diamond) 1.0mm x 1.0mm x 0.5mm 74AUP1G126FW5-7 FW5 X1-DFN1010-6 5,000/Tape & Reel -7 0.35 mm pad pitch 1.0mm x 1.0mm x 0.4mm 74AUP1G126FW4-7 FW4 X2-DFN1010-6 5,000/Tape & Reel -7 0.35 mm pad pitch X2-DFN1409-6 1.4mm x 0.9mm x 0.4mm 74AUP1G126FX4-7 FX4 5,000/Tape & Reel -7 Chip Scale Alternative 0.5 mm pad pitch 1.4mm x 1.0mm x 0.4mm 74AUP1G126FZ4-7 FZ4 X2-DFN1410-6 5,000/Tape & Reel -7 0.5 mm pad pitch Notes: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at