74LVC1G07QW5-7 Diodes Incorporated

74LVC1G07Q SINGLE BUFFER WITH OPEN DRAIN OUTPUT Description Pin Assignments The 74LVC1G07Q is an automotive-compliant, single buffer with an open-drain output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing ( Top View ) this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF NC 1 5 Vcc circuitry disables the output preventing damaging current backflow when the device is powered down. The open-drain output can be connected to other open drain outputs to implement active-low wired- A 2 OR or active-high wired-AND functions. The maximum sink current is 32mA at 5V. 4 GND 3 Y SOT25 / SOT353 Features Applications Grade 1 Ambient Temperature Operation: -40C to +125C Voltage Level Shifting Wide Supply Voltage Range from 1.65V to 5.5V General Purpose Logic 24mA Sink Current at 3.3V Power Down Signal Isolation CMOS Low Power Consumption Wide Array of Products such as: IOFF Supports Partial-Power-Down Mode Operation Automotive applications within Grade 1 Temperature Inputs Accept up to 5.5V Regardless of VCC Level Range ESD Protection Tested per AEC-Q100 Industrial Computing/Controls/Automation Exceeds 2000V Human Body Model (AEC-Q100-002) High Reliability Networking/Communications Exceeds 1000V Charged Device Model (AEC-Q100-011) Industrial/Agricultural Equipment Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The 74LVC1G07Q is suitable for automotive applications requiring specific change control this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. 74LVC1G07Q Pin Descriptions Logic Diagram Pin Name Description NC No Connection 2 4 Y A A Data Input GND Ground Y Data Output VCC Supply Voltage Function Table Input Output A Y H Z L L Absolute Maximum Ratings (Notes 4 & 5) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV V Supply Voltage Range -0.5 to 6.5 V CC V Input Voltage Range -0.5 to 6.5 V I V Voltage Applied to Output in High Impedance or I State -0.5 to 6.5 V O OFF Voltage Applied to Output in High or Low State V VO -0.5 to VCC +0.5 -50 mA IIK Input Clamp Current VI < 0 Output Clamp Current -50 mA IOK IO Continuous Output Current 50 mA ICC, IGND Continuous Current Through VCC or GND 100 mA T Operating Junction Temperature -40 to +150 C J T Storage Temperature -65 to +150 C STG Notes: 4. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 5. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. 2 of 9 74LVC1G07Q June 2020 Diodes Incorporated www.diodes.com Document number: DS39789 Rev. 2 - 2