74LVC1G17QW5-7 Diodes Incorporated

74LVC1G17Q SINGLE SCHMITT TRIGGER BUFFER Description Pin Assignments The 74LVC1G17Q is an automotive-compliant, single 1-input Schmitt trigger buffer with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs ( Top View ) are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down NC 1 5 Vcc applications using I . The I circuitry disables the output OFF OFF preventing damaging current backflow when the device is powered A 2 down. The gate performs the positive Boolean function: 3 4 GND Y Y = A SOT25 / SOT353 Features Applications Voltage Level Shifting Grade 1 Ambient Temperature Operation: -40C to +125C General Purpose Logic Wide Supply Voltage Range from 1.65V to 5.5V Power Down Signal Isolation 24mA Output Drive at 3.3V Wide Array of Products such as: CMOS Low Power Consumption Automotive Applications Within Grade 1 Temperature I Supports Partial-Power-Down Mode Operation OFF Range Inputs Accept up to 5.5V Regardless of V Level CC Industrial Computing/Controls/Automation ESD Protection Tested per AEC-Q100 High Reliability Networking/Communications Exceeds 2000V Human Body Model (AEC-Q100-002) Industrial/Agricultural Equipment Exceeds 1000V Charged Device Model (AEC-Q100-011) Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The 74LVC1G17Q is suitable for automotive applications requiring specific change control this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. 74LVC1G17Q Pin Descriptions Logic Diagram Pin Name Description NC No Connection A Y A Data Input GND Ground Y Data Output VCC Supply Voltage Function Table Input Output A Y H H L L Absolute Maximum Ratings (Notes 4 & 5) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV VCC Supply Voltage Range -0.5 to 6.5 V V I Input Voltage Range -0.5 to 6.5 V V Voltage Applied to Output in High Impedance or I State -0.5 to 6.5 V O OFF VO Voltage Applied to Output in High or Low State -0.5 to V + 0.5 V CC IIK Input Clamp Current V < 0 -50 mA I I OK Output Clamp Current -50 mA I Continuous Output Current 50 mA O ICC, IGND Continuous Current Through VCC or GND 100 mA TJ Operating Junction Temperature -40 to +150 C T STG Storage Temperature -65 to +150 C Notes: 4. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 5. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. 2 of 10 74LVC1G17Q June 2020 Diodes Incorporated www.diodes.com Document number: DS39792 Rev. 2 - 2