D5V0F4U10MR 4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Mechanical Data IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Case: MSOP-10 4 Channels of ESD protection Case Material: Molded Plastic, Green Molding Compound. UL Low Channel Input Capacitance of 0.5pF Typical Flammability Classification Rating 94V-0 Typically Used at High Speed Ports such as USB 2.0, USB 3.0, Moisture Sensitivity: Level 1 per J-STD-020 IEEE1394, Serial ATA, DVI, HDMI, PCI Terminals: Matte Tin Finish annealed over Copper leadframe Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.026 grams (approximate) MSOP-10 Ch1 1 10 NC NC 2 9 Ch4 Pin Description V 3 8 DD GND 1, 4, 6, 9 Inputs 2, 5, 7, 10 No Connection Ch2 4 7 NC 8 VN, Ground NC 5 6 Ch3 3 Vp, Power Pin Description Top View Device Schematic Ordering Information (Note 4) Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel D5V0F4U10MR-13 Standard UV3 13 12 2,500/Tape & Reel Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See D5V0F4U10MR Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Conditions Peak Pulse Current 3 A 8/20s, Per Figure 3 I PP ESD Protection Contact Discharge 8 kV Standard IEC 61000-4-2 V ESD Contact ESD Protection Air Discharge 15 kV Standard IEC 61000-4-2 V ESD Air Thermal Characteristics Characteristic Symbol Value Unit Power Dissipation (Note 5) P 500 mW D Thermal Resistance, Junction to Ambient (Note 5) 250 C/W R JA Operating and Storage Temperature Range T , T -65 to +150 C J STG Electrical Characteristics ( T = +25C unless otherwise specified) A Characteristic Symbol Min Typ Max Unit Test Conditions Reverse Working Voltage V 5.5 V RWM Reverse Current (Note 6) I 200 nA V = 5.5V R R Reverse Breakdown Voltage V 6.0 V I = 1mA BR R Reverse Clamping Voltage, Positive Transients 10 12 V I = 1A, t = 8/20s V CL PP p (Note 7) Dynamic Resistance 1.0 R I = 1A, t = 8/20s DYN R p 0.4 0.65 pF V = 2.5V, f = 1MHz R Capacitance (Note 8) C T 0.5 pF V = 0V, f = 1MHz R Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at