TM Application Specific Crystal Oscillator 5.0 x 3.2mm 1.8V CMOS Low-Jitter 62.5 MHz SAS2/SATA3 XO FDSAS6062 ASSP XO for Storage 5.0 x 3.2mm Ceramic SMD Package: Recommended Land Pattern: Product Features Very low Pk to Pk jitter - 30ps Max Low output current - 10mA Max Low power standby mode RoHS Compliant Product Description This is an enhanced high frequency 3.3V, 62.5MHz crystal clock oscillator with superb jitter and low operating current for Serial Attached SCSI Hard Disk Drive applications. Pin Functions: Pin Function Applications 1 OE Function Serial Attached SCSI 6G Hard Disk Drive 2 Ground 3 Clock Output 4 V DD *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FDSAS6062 SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888 www.pericom.com All specifications are subject to change without notice. FDSAS6062 Rev A 06/18/10 13.3V CMOS Low-Jitter 62.5 MHz SAS2/SATA3 XO FDSAS6062 TM Application Specific Crystal Oscillator 5.0 x 3.2mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency 62.5 MHz Supply Voltage V 1.71 1.8 1.89 V DD Supply Current, Output Enabled 10 mA Supply Current, Output Disabled 100 A Frequency Stability 50 ppm See Note 1 below Operating Temperature Range -20 +70 C Output Logic 0, V 10% V V OL DD Output Logic 1, V 90% V V OH DD Output Load 15 pF Duty Cycle 45 55 % Measured 50% V DD Rise and Fall Time 1 ns Measured 20/80% of waveform Jitter, pk-pk 30 ps 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable 0.7 V V or open DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V V Output is Hi-Z DD Internal Pullup Resistance 30 k Output Disable Delay 200 ns Output Enable Delay 2 ms Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 C For the latest product information visit: