A product Line of Diodes Incorporated PI3C3125/PI3C3126 2.5V/3.3V, High Bandwidth, Hot Insertion,4-Bit, 2-Port Bus Switch with Individual Enables Description Features Near-Zero propagation delay Diodes PI3C3125 and PI3C3126 are 2.5 volt or 3.3 volt, 4-bit 5-ohm switches connect inputs to outputs bus switches designed with four individual 5-ohm bus switches with fast indiviual enables in an industry standard 74XX125/126 High Bandwidth (>400 MHz) pinout. When enabled via the associated Bus Enable pin, the A Rail-to-Rail, or 2.5V or 3.3V Switching pin is directly connected to the B pin for that particular gate. 5V I/O Tolerant e bTh us switch introduces no additional propagation delay or 2.5V Supply Voltage Operation additional ground bounce noise. Permits Hot Insertion e PTh I3C3125 device has active LOW enables, and the PI3C3126 Packaging (Pb-free & Green available): has active HIGH enables. It is very useful in switching signals that 14-pin 150-mil wide plastic SOIC (W) have high bandwidth (>400 MHz). 14-pin 170-mil wide plastic TSSOP (L) 16-pin 150-mil wide plastic QSOP (Q) Applications High Bandwidth Data Switching Hot Docking PI3C3125 Block Diagram PI3C3126 Block Diagram A0 B0 B0 A0 BE0 BE0 B1 A1 B1 A1 BE1 BE1 B2 A2 B2 A2 BE2 BE2 B3 A3 B3 A3 BE3 BE3 www.diodes.com September 2017 PI3C3125/PI3C3126 Diodes Incorporated Document Number DS40194 Rev 1-2 1A product Line of Diodes Incorporated PI3C3125/PI3C3126 Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Note: Storage Temperature ............................................................65C to +150C Stresses greater than those listed under MAXIMUM Ambient Temperature with Power Applied ...........................40C to +85C RATINGS may cause permanent damage to the device. This is a stress rating only and functional Supply Voltage to Ground Potential (Inputs & V Only) .....0.5V to +4.6V CC operation of the device at these or any other Supply Voltage to Ground Potential (Outputs & D/O Only) ..0.5V to +4.6V conditions above those indicated in the operational DC Input Voltage ....................................................................0.5V to +5.5V sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended DC Output Current ............................................................................... 120mA periods may affect reliability. Junction Temperature .............................................................................125C PI3C3125 14-Pin Configuration PI3C3126 14-Pin Configuration 1 Vcc BE0 14 1 Vcc BE0 14 2 BE3 A0 13 2 BE3 A0 13 3 A3 B0 12 3 A3 B0 12 14-PIN 14-PIN 4 B3 BE1 11 4 B3 BE1 11 W14 W14 5 BE2 A1 10 5 BE2 A1 10 L14 L14 6 A2 B1 9 6 A2 B1 9 7 B2 GND 8 7 B2 GND 8 PI3C3125 16-Pin Configuration PI3C3126 16-Pin Configuration 1 Vcc NC 16 1 Vcc NC 16 2 BE3 BE0 15 2 BE3 BE0 15 3 A3 A0 14 3 A3 A0 14 16-PIN 16-PIN 4 B3 B0 13 4 B3 B0 13 Q16 Q16 5 BE2 BE1 12 5 BE2 BE1 12 6 A2 A1 11 6 A2 A1 11 7 B2 B1 10 7 B2 B1 10 8 NC GND 9 8 NC GND 9 (1) Truth Table Pin Description PI3C3125 PI3C3126 An Bn V Function Pin Name Description CC BEn BEn BEn Switch Enable (PI3C3125) X* X Hi-Z Hi-Z GND Disconnect BEn Switch Enable (PI3C3126) H L Hi-Z Hi-Z V Disconnect A3 - A0 Bus A CC L H Bn An V Disconnect B3 - B0 Bus B CC Note: V Power CC 1. H = High Voltage Level, L = Low Voltage Level HI-Z = High Impedance, X = Dont Care GND Ground * A pull-up resistor should be provided for power-up protection. www.diodes.com September 2017 PI3C3125/PI3C3126 2 Diodes Incorporated Document Number DS40194 Rev 1-2