A product Line of Pb Diodes Incorporated Lead-free Green PI3USB102G USB 2.0 High-Speed (480 Mbps) Switch with 5V Protection with Improved Ioff Voltage Range Features Description USB 2.0 compliant (high speed, full speed, and low speed) e PTh I3USB102G is a single differential channel 2:1 multiplexer/ demultiplexer USB 2.0 Switch. Industry leading advantages include a R : 4.0 typical V = 3.0V ON DD propagation delay of 250ps, resulting from its low channel resistance Channel On Capacitance: 6.0pF and I/O capacitance. PI3USB102G is bidirectional and oerff s very Wide -3dB Bandwidth: 1,000MHz little attenuation of high-speed signals. It is designed for low bit-to- Low bit-to-bit skew bit skew, high channel-to-channel noise isolation and is compatible Low Crosstalk: -29B 480 Mbps with various standards, such as High Speed USB 2.0 (480 Mb/s). Off Isolation: -28dB 480 Mbps e PTh I3USB102G oerff s over voltage protection for the Y+/Y- pins as per the USB 2.0 specification. With the chip powered on or off if Near-Zero propagation delay: 250ps Y+/Y- pins are shorted to VBUS (5V +/- 5%), M+/M- and D+/D- Support 1.8-V logic on control pins outputs are clamped to provide voltage protection for downstream V Operating Range: 3.0V to 5.5V DD devices. ESD: 8kV HBM on Y+/Y- pins per JESD22 standard e PTh I3USB102G has a better Y+/Y- power-off leakage current with Y+/Y- pins have over-voltage protection and can tolerate a the voltage range of 0V to 5V versus 0V to 3.3V for the PI3USB102E. short to VBUS Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Application Packaging (Pb-free & Green): Routes signals for USB 2.0 -10-contact TQFN, 1.3mm x 1.6mm x 0.75mm (ZL10) PC, Notebooks and Hand-held devices Block Diagram over voltage protection M+ Y+ M - Y - over voltage protection D+ D - SEL Control Logic OE Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See A product Line of Diodes Incorporated PI3USB102G Truth Table SEL OE Y+ Y- X H Hi-Z Hi-Z L L M+ M- H L D+ D- Pin Configuration 10 8 9 Y+ D+ 1 7 2 Y- 6 D- 5 3 4 Pin Description Pin Pin Name Description 1 Y+ USB Data bus 2 Y- USB Data bus 3 GND Ground 4 M- Multiplexed Source Inputs 5 M+ Multiplexed Source Inputs 6 D- Multiplexed Source Inputs 7 D+ Multiplexed Source Inputs 8 OE Switch Enable 9 V Positive Power Supply DD 10 SEL Switch Select www.diodes.com August 2018 PI3USB102G 2 Diodes Incorporated Document Number DS41285 Rev 1-2 GND SEL V M- DD M+ OE