Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FSUSB40 Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch March 2013 FSUSB40 Low-Power, Two-Port, Hi-Speed, USB2.0 (480Mbps) Switch Features Description The FSUSB40 is a bi-directional, low-power, two-port, Low On Capacitance: 5.9pF Typical Hi-Speed, USB2.0 switch. Configured as a double-pole, Low On Resistance: 3.9 Typical double-throw switch (DPDT) switch, it is optimized for switching between two Hi-Speed (480Mbps) sources or Low Power Consumption: 1A Maximum a Hi-Speed and Full-Speed (12Mbps) source. - 15A Maximum I over an Expanded Voltage CCT The FSUSB40 is compatible with the requirements of Range (V =1.8V, V =4.3V) IN CC USB2.0 and features an extremely low on capacitance Wide -3db Bandwidth: > 720MHz (C ) of 5.9pF. The wide bandwidth of this device ON (720MHz) exceeds the bandwidth needed to pass the Packaged in: third harmonic, resulting in signals with minimum edge - 10-Lead MicroPak (1.6 x 2.1mm) and phase distortion. Superior channel-to-channel - 10-Lead UMLP (1.4 x 1.8mm) crosstalk also minimizes interference. 8kV ESD Rating, >16kV Power/GND ESD Rating The FSUSB40 contains special circuitry on the switch I/O pins for applications where the V supply is Power-Off Protection on All Ports When V =0V CC CC powered-off (V =0), which allows the device to CC - D+/D- Pins Tolerate up to 5.25V withstand an over-voltage condition. This device is Over-Voltage Tolerance (OVT) on all USB Ports designed to minimize current consumption even when Up to 5.25V without External Components the control voltage applied to the SEL pin is lower than the supply voltage (V ). This feature is especially CC valuable to ultra-portable applications, such as cell Applications phones, allowing for direct interface with the general- purpose I/Os of the baseband processor. Other Cell phone, PDA, Digital Camera, and Notebook applications include switching and connector sharing in LCD Monitor, TV, and Set-Top Box portable cell phones, PDAs, digital cameras, printers, and notebook computers. IMPORTANT NOTE: For additional performance information, please contact analogswitch fairchildsemi.com. Ordering Information Operating Part Number Top Mark Package Eco Status Temperature Range 10-Lead MicroPak 1.6 x 2.1mm, FSUSB40L10X HD -40 to +85C RoHS JEDEC MO-255B 10-Lead, Quad, Ultrathin Molded FSUSB40UMX HC -40 to +85C Green Leadless Package (UMLP), 1.4 x 1.8mm MicroPak is a trademark of Fairchild Semiconductor Corporation. For Fairchilds definition of Eco Status, please visit: