A product Line of Pb Diodes Incorporated Lead-free Green PI3USB221 High-Speed USB2.0 1:2 Multiplexer/DeMultiplexer Switch with Signal Enable Features Description V Operation at 2.5 V and 3.3 V e PTh I3USB221 is a high-bandwidth switch specially designed DD for the switching of high-speed USB 2.0 signals in handset and V Accepts Signals up to 5.5 V I/O consumer applications, such as cell phones, digital cameras, 1.8-V Compatible Control-Pin Inputs and notebooks with hubs or controllers with limited USB I/ Low-Power Mode When OE Is Disabled (2 A) Os. The wide bandwidth (1.1 GHz) of this switch allows signals r = 6 Maximum ON to pass with minimum edge and phase distortion. The device r = 0.2 Typical ON multiplexes differential outputs from a USB host device to one of two corresponding outputs. e Th switch is bidirectional and oerff s Cio(on) = 6 pF Maximum little or no attenuation of the high-speed signals at the outputs. It Low Power Consumption (50 A Maximum) is designed for low bit-to-bit skew and high channel-to-channel ESD > 8kV contact on USB signal path per IEC61000-4-2) noise isolation, and is compatible with various standards, such as High Bandwidth (1.1 GHz Typical) high-speed USB 2.0 (480 Mbps). Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Packaging (Pb-free & Green): Applications 10-contact, TDFN (ZE10) Routes Signals for USB 1.0, 1.1, and 2.0 10-contact, TLLGA(XA10) Mobile Industry Processor Interface (MIPI) Signal Routing Block Diagram D+ 1D+ 1D- D- 2D+ 2D- CONTROL S LOGIC OE Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See A product Line of Diodes Incorporated PI3USB221 Pin Configuration TDFN Package TLLGA Package TLLGA Package (Top View) (Top View) (Bottom View) 1 VDD 1D+ 10 S 1D+ 9 S 1 1D+ 9 1 10 10 S 1D- 2 9 8 D+ 1D- 2 D+ 8 2 1D- 3 D+ 2D+ 8 7 3 D- 2D+ D- 7 3 2D+ D- 4 7 2D- 5 5 6 4 2D- OE 6 4 OE 2D- 5 OE GND 6 Pin Description Name Description OE Active LOW, Output enable S Select input D COM port nD I/O for USB data path (port 1 and port 2) Truth Table S OE Function X H Disconnect L L D = 1D H L D = 2D www.diodes.com July 2019 PI3USB221 2 Diodes Incorporated Document Number DS42092 Rev 1-3 VDD GND VDD GND