A product Line of Pb Diodes Incorporated Lead-free Green PI3USB223 USB 2.0 High-Speed and Audio Switches with Negative Signal Capability Features Description Single +2.7V to +4.4V Supply Voltage e PTh I3USB223 combines AC coupled audio signals and USB2.0 Low 50A Supply Current HS (480Mbps) on the same pins. This enables users to use a single -3dB Bandwidth: 1500MHz (typ) connector to drive either a USB end point or an audio end point. Low 2.5(typ)On-Resistance PI3USB223 incorporates gate pump technology required to maintain THD+N: 0.02% low Ron for ideal audio THD while reducing the capacitance aeff ct Shorting D+/R and D-/L to Vbus will not cause leakage when of high speed USB signals. The device also incorporates a substrate V = 0 DD pump technology which allows -2V signals to pass through the Internal Shunt Resistors for Click-and-Pop Reduction switch without causing any leakage. VBUS Detection for Automatic Switch Path Selection e PTh I3USB223 features protection on D+/R and D-/L to ensure no Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) damage will happen to the IC if these pins are shorted accidentally Halogen and Antimony Free. Green Device (Note 3) to Vbus as well as ensuring there is no leakage when V is on or DD Packaging (Pb-free & Green available): o. Aff lso, it includes VBUS detection (VB) to automatically switch 10-pin contact UQFN, 1.4 x 1.8, (ZM10) to the USB signal path upon detection of a valid VBUS signal. It also features internal shunt resistors on the audio path to reduce clicks and pops heard during output. The device is available in a space-saving 10-pin, 1.4mm x 1.8mm UQFN package, and operate over the -40C to +85C temperature range. Block Diagram Truth Table ASEL V VBUS L/R D+/D- L/R Shunt DD D+ X L L OFF OFF OFF D+/R X H L OFF OFF ON D- X L H OFF OFF OFF L H H OFF ON ON D-/L R H H H ON OFF OFF L VBUS VVBDET ASEL Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See A product Line of Diodes Incorporated PI3USB223 Pin Configuration 7 6 88 5 V ASEL DD VBUS 99 4 GND D+ 1010 3 L 1 2 Pin Description Pin Name Description 1 D- USB D- from system side 2 R Audio Input (Right) 3 L Audio Input (Left) 4 GND Ground 5 V Positive Supply Voltage Input. Bypass V to GND with a 0.1F capacitor as close to the device as possible. DD DD 6 D-/L Common Terminal for D- or Left Audio 7 D+/R Common Terminal for D+ or Right Audio Switch SEL to override VBUS detection when VBUS and V are both high. DD 8 ASEL If ASEL is HIGH, then audio path will be on If ASEL is LOW then USB path will be on ASEL has an internal 3M-ohm pull-down If ASEL is tied LOW, then VBUS detection can be used for auto switching. If ASEL is LOW 9 VBUS VBUS = HIGH means USB path is active 10 D+ USB D+ from system side www.diodes.com August 2019 PI3USB223 2 Diodes Incorporated Document Number DS42160 Rev 1-3 D- D+/R R D-/L