PI3USB30532 3.3V, USB3.0/DP1.2 6:4 Matrix Switch Features Description 6 Differential Channel to 2/4 Differential Channel Matrix Pericom Semiconductors PI3USB30532 is a 6:4 differential chan - Switch nel bi-directional matrix switch solution for switching USB3.0 and/or DP1.2 signals through USB3.0 Type-C connector. USB 3.0 5Gb/s Super Speed and DP 1.2 5.4Gb/s switching to USB Type C connector It multiplexes either 1 lane of USB3.0, 1 lane of USB3.0 and 2 chan- 2 nels of DP1.2 or 4 channels of DP1.2 to the USB Type C connector. Supports either pin control or I C control to configure the In addition, AUXHPD channels are also multiplexed to the Type mux C connector. PI3USB30532 offers excellent signal integrity for Low insertion loss: -1.2dB 5Gb/s high-speed signals and low power dissipation. Insertion loss is Return loss: -21dB 5Gb/s -1.2dB and return loss is -21dB at 5Gb/s speed of USB3.0. -3dB Bandwidth : 6GHz Multiplexes one of the following to USB Type C connector: Application USB3.0 signal only Routing USB3.0 SuperSpeed and DP1.2 signals through the USB Type C Connector. One lane of USB3.0 signal and 2 channels of DP1.2 or 4 channels of DP1.2 signal. Applications include Ultrabook, 2 in 1 Notebook, Tablet, With DP1.2 operating, AUX+ and AUX- are muxed to SBU Mobile Workstation, All In One PC, Monitor, Docking pins. Max swing on SBU pins are from -0.35V to 3.95V Station, Phone 3.0V to 3.6V Power Supply. o o Industrial Temperature Range: -40 C to 85 C Block Diagram Packaging (Pb-free & Green): CONF2 CONF1 CONF0 40- contact, TQFN(3 x6mm) Mode I2C Conf2/SDA Register & Conf1/SCL Control Control Decode Conf0/A1 Pin Configuration (40 pin TQFN) A0 DP2+ DP2- TX1+ 40 39 38 37 36 35 TX1- TX+ MODE 1 34 RX2+ TX- DP1+ 2 33 RX2- DP1- 3 32 VDD DP1+ TX2+ VDD 4 31 TX2+ DP1- TX2- DP2+ 5 TX2- 30 DP2- 6 29 VDD VDD 7 TX1+ 28 DP3+ DP3- GND DP3+ 8 27 TX1- DP3- 9 VDD 26 RX1+ VDD 10 25 RX1+ RX1- RX+ TX+ RX- 11 RX1- 24 TX- 12 23 VDD VDD 13 22 SBU1 RX2+ DP0+ RX2- A0 14 DP0- 21 SBU2 15 16 17 18 19 20 SBU1 SBU2 AUX+ AUX- All trademarks are property of their respective owners. 1 www.pericom.com 02/26/15 15-0020 GND DP0- RX+ DP0+ CONF2/SDA RX- GND GND CONF1/SCL AUX+ CONF0/A1 AUX-PI3USB30532 3.3V, USB3.0/DP1.2 3:2 Matrix Switch Pin Description Pin Pin Name Type Description 4, 7, 10, 13, 23, 26, VDD Power 3.0V - 3.6V power supply. 29, 32 Differential USB3.0 Transmit signal. Connected internally with 100Kohm pull- 11, 12 TX+, TX- I/O down to ground. Differential USB3.0 Receive signal. Connected internally with 100Kohm pulldown 16, 17 RX+, RX- I/O to ground. 39, 40 DP0+, DP0- I/O Differential DP0 signal. Connected internally with 100Kohm pulldown to ground. 2, 3 DP1+, DP1- I/O Differential DP1 signal. Connected internally with 100Kohm pulldown to ground. 5, 6 DP2+, DP2- I/O Differential DP2 signal. Connected internally with 100Kohm pulldown to ground. 8, 9 DP3+, DP3- I/O Differential DP3 signal. Connected internally with 100Kohm pulldown to ground. 19, 20 AUX+, AUX- I/O Differential Auxiliary signal for DP. 22, 21 SBU1, SBU2 I/O Side Band signal at Type C connector. 25, 24 RX1+, RX1- I/O Differential Receive signal 1 at Type C connector. 28, 27 TX1+, TX1- I/O Differential Transmit signal 1 at Type C connector. 31, 30 TX2+, TX2- I/O Differential Transmit signal 2 at Type C connector. 34, 33 RX2+, RX2- I/O Differential Receive signal 2 at Type C connector. Control mode selection 1 MODE I MODE = 1, I2C control = 0, pin control through CONF 2:0 Switch configuration selection pin when MODE = 0, please refer to switch selec- 35, 36, 38 CONF 2:0 I tion truth tanle for detail, When MODE = 1, these pins are part of the I2C inter- face as SDA/SCL/A1. 38 SDA I/O Serial in data of I2C when MODE = 1. 36 SCL I I2C clock input pin when MODE = 1. 35 A1 I A 1 of A 1:0 I2C selectable address when MODE = 1. 14 A0 I A 0 of A 1:0 I2C selectable address when MODE = 1. 15, 18, 37, Center Pad GND Power Ground supply. All trademarks are property of their respective owners. 2 www.pericom.com 02/26/15 15-0020