PI6C10806BLEX Diodes Incorporated

PI6C10806B 1.5V/1.8V/2.5V/3.3V, 160MHz, Low Skew 1:6 Crystal to LVCMOS Clock Buffer Features Description Six low skew outputs: < 80ps Pericom Semiconductors PI6C10806B is a low skew six output Crystal oscillator input: 10MHz to 50MHz crystal oscillator driver. Crystal oscillator input range is from 10MHz to 50MHz. If XTAL IN is driven with a signal source, Switching frequency up to 160 MHz then the input frequency can be as high as 160MHz. PI6C10806B, Fast output rise/fall time (down to 1.8V): < 800ps the outputs are configured into 2 groups: a five output and a single Synchronous output enables output each with independent output enable. Industrial Temperature range: 40C to +85C PI6C10806B has a wide range of operating voltages: 1.5V, 1.8V, 1.5V, 1.8V, 2.5V and 3.3V operation 2.5V, and 3.3V. This feature paired with the low output-to-output Packaging (Pb-free & Green available): and part-to-part skew makes the device ideal for low voltage, low 16-pin 173-mil wide TSSOP (L) power, high frequency single ended applications such as networking Block Diagram Pin Configuration 5 XTAL IN XTAL OUT 1 16 XTAL IN BCLK 0:4 ENABLE2 2 15 ENABLE1 XTAL OUT GND 3 14 BCLK5 ENABLE1 Sync V BCLK0 4 13 DDO BCLK4 V 5 12 BCLK5 DDO BCLK1 6 11 GND GND 7 10 BCLK3 ENABLE2 Sync BCLK2 8 9 V DD (1) Pin Description Truth Table Pin Name Description Inputs Outputs ENABLE1 ENABLE2 BCLK 0:4 BCLK5 ENABLE1, Active High Output Enable Inputs ENABLE2 L L L L XTAL IN Crystal interface L H L Switching XTAL OUT Crystal interface H L Switching L BCLK 0:5 Clock Outputs H H Switching Switching GND Ground Note: 1. H = High Voltage Level, L = Low Voltage Level V Core Power DD V Output Power DDO PS9038C 01/16/13 13-0010 1PI6C10806B 1.5V/1.8V/2.5V/3.3V, 160MHz, Low Skew 1:6 Crystal to LVCMOS Clock Buffer Power Supply DC Characteristics (V /V = 3.3V 5%, T = -40C to 85C) DD DDO A Symbols Parameters Test Conditions Min. Typ Max. Units V Core Supply Voltage 3.135 3.3 3.465 V DD V Output Supply Voltage 3.135 3.3 3.465 V DDO I Power Supply Current ENABLE1:2 = 00 10 mA DD I Output Supply Current ENABLE1:2 = 00 5 mA DDO Power Supply DC Characteristics (V /V = 2.5V 5%, T = -40C to 85C) DD DDO A Symbols Parameters Test Conditions Min. Typ Max. Units V Core Supply Voltage 2.375 2.5 2.625 V DD V Output Supply Voltage 2.375 2.5 2.625 V DDO I Power Supply Current ENABLE1:2 = 00 8 mA DD I Output Supply Current ENABLE1:2 = 00 4 mA DDO Power Supply DC Characteristics (V /V = 1.8V 0.2V, T = -40C to 85C) DD DDO A Symbols Parameters Test Conditions Min. Typ Max. Units V Core Supply Voltage 1.6 1.8 2.0 V DD V Output Supply Voltage 1.6 1.8 2.0 V DDO I Power Supply Current ENABLE1:2 = 00 5 mA DD I Output Supply Current ENABLE1:2 = 00 3 mA DDO Power Supply DC Characteristics (V /V = 1.5V 5%, T = -40C to 85C) DD DDO A Symbols Parameters Test Conditions Min. Typ Max. Units V Core Supply Voltage 1.425 1.5 1.575 V DD V Output Supply Voltage 1.425 1.5 1.575 V DDO I Power Supply Current ENABLE1:2 = 00 5 mA DD I Output Supply Current ENABLE1:2 = 00 3 mA DDO Power Supply DC Characteristics (V = 3.3V 5%, T = -40C to 85C) DD A Symbols Parameters Test Conditions Min. Typ Max. Units V = 2.5V 5% DDO I Power Supply Current ENABLE1:2 = 00 V = 1.8V 0.2V 10 mA DD DDO V = 1.5V 5% DDO V = 2.5V 5% 4 DDO I Output Supply Current ENABLE1:2 = 00 V = 1.8V 0.2V 3 mA DDO DDO V = 1.5V 5% 3 DDO PS9038C 01/16/13 13-0010 2