PI6C20800S
PCI Express 1:8
HCSL Clock Buffer
Features Description
PI6C20800S is a PCI Express, high-speed, low-noise differential
Phase jitter filter for PCIe application
clock buffer designed to be a companion to PI6C410BS PCI
Eight Pairs of Differential Clocks
Express clock generator for Intel server chipsets. The device
Low skew < 50ps (PI6C20800S), <60ps (PI6C20800SI)
distributes the differential SRC clock from PI6C410BS to eight
differential pairs of clock outputs either with or without PLL.
Low Cycle-to-cycle jitter < 70ps
The input SRC clock can be divided by 2 when SRC_DIV# is
Output Enable for all outputs
LOW. The clock outputs are controlled by input selection of
Outputs Tristate control via SMBus
SRC_STOP#, PWRDWN# and SMBus, SCLK and SDA. When
Power Management Control input of either SRC_STOP# or PWRDWN# is LOW, the output
clocks are Tristated. When PWRDWN# is LOW, the SDA and
Programmable PLL Bandwidth
SCLK inputs must be Tristated.
PLL or Fanout operation
3.3V Operation
Industrial Temperature Option - PI6C20800SI
Packaging (Pb-Free & Green):
48-Pin SSOP (V)
48-Pin TSSOP (A)
Block Diagram Pin Configuration
48
SRC_DIV# 1 V
DD_A
47
V 2 V
DD SS_A
46
V 3 I
OE_INV SS REF
OE [0:7] Output
45
SRC 4 LOCK
SRC_STOP# Control
44
SRC# 5 OE_7
OUT0
PWRDWN#
OUT0# 43
OE_0 6 OE_4
42
OE_3 7 OUT7
OUT1
OUT1#
SCLK 41
SMBus OUT0 8 OUT7#
SDA
Controller
40
OUT2 OUT0# 9 OE_INV
OUT2#
39
VSS 10 V
DD
PLL/BYPASS#
OUT3 38
V 11 OUT6
DD
OUT3#
37
OUT1 12 OUT6#
SRC_DIV#
OUT4
36
OUT1# 13 OE_6
SRC OUT4#
35
OE_1 14 OE_5
SRC#
OUT5
34
OE_2 15 OUT5
OUT5#
33
OUT2 16 OUT5#
OUT6
32
OUT2# 17 V
SS
OUT6#
DIV
31
PLL_BW# V 18 V
SS DD
PLL
OUT7
30
V 19 OUT4
DD
OUT7#
29
OUT3 20 OUT4#
LOCK
28
OUT3# 21 PLL_BW#
27
PLL/BYPASS# 22 SRC_STOP#
26
SCLK 23 PWRDWN#
25
SDA 24 V
SS
PS8887E 05/15/12
12-0206
1PI6C20800S
PCI Express 1:8
HCSL Clock Buffer
Pin Descriptions
Type Pin # Descriptions
Pin Name
3.3V LVTTL input for selecting input frequency divide by 2,
SRC_DIV# Input 1
active LOW.
SRC & SRC# Input 4, 5 0.7V Differential SRC input from PI6C410 clock synthesizer
6, 7, 14, 15, 35, 36,
OE [0:7] Input 3.3V LVTTL input for enabling outputs, active HIGH.
43, 44
3.3V LVTTL input for inverting the OE, SRC_STOP# and
PWRDWN# pins.
OE_INV Input 40
When 0 = same stage
When 1 = OE[0:7], SRC_STOP#, PWRDWN# inverted.
8, 9, 12, 13, 16 17,
OUT[0:7] & OUT[0:7]# Output 20, 21, 29, 30, 33, 34, 0.7V Differential outputs
37, 38, 41, 42
PLL/BYPASS# Input 22 3.3V LVTTL input for selecting fan-out of PLL operation.
SCLK Input 23 SMBus compatible SCLOCK input
SDA I/O 24 SMBus compatible SDATA
I Input 46 External resistor connection to set the differential output current
REF
SRC_STOP# Input 27 3.3V LVTTL input for SRC stop, active LOW
PLL_BW# Input 28 3.3V LVTTL input for selecting the PLL bandwidth
PWRDWN# Input 26 3.3V LVTTL input for Power Down operation, active LOW
3.3V LVTTL output, transition high when PLL lock is achieved
LOCK Output 45
(Latched output)
V Power 2, 11, 19, 31, 39 3.3V Power Supply for Outputs
DD
V Ground 3, 10, 18, 25, 32 Ground for Outputs
SS
V Ground 47 Ground for PLL
SS_A
V Power 48 3.3V Power Supply for PLL
DD_A
Serial Data Interface (SMBus)
PI6C20800S is a slave only SMBus device that supports indexed block read and indexed block write protocol using a single 7-bit
address and read/write bit as shown below.
Address assignment
A6 A5 A4 A3 A2 A1 A0 R/W
1 1 0 1 1 1 0 0/1
(1)
Data Write Protocol
1 bit 7 bits 1 1 8 bits 1 8 bits 1 8 bits 1 8 bits 1 1 bit
Byte Data Data
Start Slave Register
W Ack Ack Count Ack Byte Ack Byte N Ack Stop bit
bit Addr offset
= N Offset - 1
Note:
1. Register offset for indicating the starting register for indexed block write and indexed block read. Byte Count in write mode cannot be 0.
PS8887E 05/15/12
12-0206
2