Issue 02.2014 embedded LCD-DISPLAY 240x128 WITH INTELLIGENCE Dimension: 113x70x12mm TECHNICAL DATA * LCD GRAPHICS DISPLAY WITH A RANGE OF GRAPHICS FUNCTIONS * 8 BUILT-IN SOFT-FONTS * FONT ZOOM FROM approx. 2mm TO approx. 50mm, also ROTATED BY 90 * 3 DIFFERENT ONBOARD INTERFACES: RS-232, IC BUS OR SPI BUS * 240x128 PIXELS WITH LED BACKLIGHT, BLUE NEGATIVE OR * BLACK&WHITE POSITIVE, FSTN TECHNOLOGY OR AMBER * POWER SUPPLY +5V TYPICAL 75mA / 210mA (WITHOUT / WITH LED BACKLIGHT) * POSITIONING ACCURATE TO THE PIXEL WITH ALL FUNCTIONS * STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH... * CLIPBOARD FUNCTIONS, PULL-DOWN MENUS * UP TO 256 IMAGES STORABLE INTERNALLY * UP TO 256 MACROS PROGRAMMABLE (32 kB EEPROM ONBOARD) * COMBINATIONS OF TEXT AND GRAPHICS, FLASHING ATTRIBUTES: ON/OFF/INVERTED * BACKLIGHT CAN BE SWITCHED BY SOFTWARE * ANALOG TOUCH PANEL: VARIABLE GRID * FREELY DEFINABLE KEYS AND SWITCHES ORDERING CODES DISPLAYS 240x128 DOTS, WHITE LED-BACKLIGHT, BLUENEGATIVE EA eDIP240B-7LW AS ABOVE, BUTWITH TOUCH PANEL EA eDIP240B-7LWTP 240x128 DOTS, WHITE LED-BACKLIGHT, POSITIVE MODE, FSTN EA eDIP240J-7LW AS ABOVE, BUTWITH TOUCH PANEL EA eDIP240J-7LWTP 240x128 DOTS, WHITE LED-BACKLIGHT, POSITIVE MODE, FSTN EA eDIP240J-7LA AS ABOVE, BUTWITH TOUCH PANEL EA eDIP240J-7LATP STARTERKIT INCLUDES EA eDIP240B-7LWPAND EV ALUATION BOARD WITH USB FOR DIRECT CONNECTION TO PC AND INTERFACE BOARDS FOR CONNECTION WITH YOUR HOST SYSTEM EA EVALeDIP240B AS ABOVE, BUTWITH EA eDIP240J-7LWTP EA EVALeDIP240J ADDTIOTNAL PARTS MOUNTING BEZEL (ALUMINIUM), BLACK ANODIZED EA 0FP241-7SW SOCKET 1x20, 4.5mm HIGH (1 piece) EA B254-20 Zeppelinstrae 19 D-82205 Gilching Phone +49-(0)8105-778090 Fax +49-(0)8105-778099 www.lcd-module.de info lcd-module.deSpecifications may be changed without EA eDIP240-7 prior notice. Printing error reserved Page 2 Documentation of revision Date Type Old New Reason / Description 15.02.04 V1.0 Preliminary version - New Command Macro-Process MD../ MZ../ MS.. new firmware 24.11.04 V1.1 - Adaptor MAX232 circuit diagramm - Modulo 8 Modulo 256 typing error in protocol description New Command Terminal-Cursor Save/Restore TS/ TR new firmware 18.01.05 V1.2 New Command Bargraph send continous AQ 2 New addressable 2-wire RS485 Interface with SN75176 07.04.05 V1.3 New 32 additional I2C Addresses new firmware New Commands AG, SI, KA 13.05.05 V1.4 Bugfix in SPI- I2C-Mode after wrong Packet (NAK) new firmware some problems with opertating >60C (display corrupted) 04.10.05 V1.5 New Protocoll Info Command DC2 1 P bcc new firmware Bugfix in GZ (pointsize), B RLOU (typ2+3 linewitdh) 18.10.05 V1.6 OUT-port functionality on not used configuration pins new firmware 17.02.06 - Drawing for mounting panel EA 0FP241-7SW included - 27.04.06 - V/A 61.0mm Revised drawing (V/A = 60.4mm and pcb Rev.D) 29.06.07 - Insert EA eDIP240J-7LA CONTENTS GENERAL ..................................................................................................................... 3 ELECTRICAL SPECIFICATIONS...................................................................................4 RS-232.......................................................................................................................... 5 SPI................................................................................................................................6 IC ................................................................................................................................7 SOFTWARE PROTOCOL ............................................................................................ 8-9 TOUCH PANEL ............................................................................................................ 10 CHARACTER SETS .................................................................................................. 11-12 COMMANDS / FUNCTIONS IN TABULAR FORM ..................................................... 13-15 ACKNOWLEDGEMENTS FROMTHE CONTR OL PANEL............................................. 16 PROGRAMMING EXAMPLE ........................................................................................ 17 PROGRAMMING MACROS ...................................................................................... 18-19 DIMENSIONS .............................................................................................................. 20