REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
A Changes IAW NOR 5962-R030-93 - wlm. 93-01-22 Monica L. Poelking
B Changes IAW NOR 5962-R034-96 - jak. 96-02-29 Monica L. Poelking
C Change drawing CAGE code to 67268. Update boilerplate to MIL-PRF-38535 01-11-15 Thomas M. Hess
requirements. - jak
D
Add vendor code 0C7V7 and 0DKS7. Update boilerplate to MIL-PRF-38535 08-05-27 Thomas M. Hess
requirements. -phn
REV
SHEET
REV
SHEET
REV STATUS REV D D D D D D D D D D D
OF SHEETS
SHEET 1 2 3 4 5 6 7 8 9 10 11
PMIC N/A
PREPARED BY
DEFENSE SUPPLY CENTER COLUMBUS
Greg A. Pitz
COLUMBUS, OHIO 43218-3990
STANDARD
CHECKED BY
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
5962-85501 01 R A
Drawing number Device type Case outline Lead finish
(see 1.2.1) (see 1.2.2) (see 1.2.3)
1.2.1 Device types. The device types identify the circuit function as follows:
Device type Generic number Circuit function
01 40106B Hex Schmitt trigger
02 14584 Hex Schmitt trigger
1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
C GDIP1-T14 or CDIP2-T14 14 Dual-in-line
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings. 1/
Supply voltage range (V ) .................................................................................. -0.5 V dc to +18 V dc
DD
Input voltage range .............................................................................................. -0.5 V dc to V +0.5 V dc
DD
Storage temperature range (T ) ....................................................................... -65C to +150C
STG
Maximum power dissipation (P ) ........................................................................ 500 mW 2/
D
Lead temperature (soldering, 10 seconds)........................................................... +300C
Thermal resistance, junction-to-case ( ) ........................................................... See MIL-STD-1835
JC
Junction temperature (T ) .................................................................................... +175C
J
1.4 Recommended operating conditions. 1/
Supply voltage range (V ) .................................................................................. +3.0 V dc to +15 V dc
DD
Case operating temperature range (T )............................................................... -55C to +125C
C
1/ Unless otherwise specified, all voltages are referenced to ground.
2/ For T = +100C to +125C, derate linearly at 12 mW/C to 200 mW.
C
SIZE
STANDARD
5962-85501
MICROCIRCUIT DRAWING A
DEFENSE SUPPLY CENTER COLUMBUS
REVISION LEVEL SHEET
COLUMBUS, OHIO 43218-3990
D
2
DSCC FORM 2234
APR 97